Stair Framing | Building A Mountian Cabin EP21

Moments in this video

1. 7:30–8:22 Check and Adjust First Stringer From How to Lay Out and Cut Deck Stair Stringers, Step 6: Trim the Bottom of the Stringers

   Place the first cut stringer in its intended position and use a level to check if each tread surface is perfectly horizontal. If the stringer is not sitting level (e.g., if the heel cut is open on one side), mark the area that needs trimming. Use a circular saw to carefully trim the excess material from the heel cut. Recheck with the level to ensure the stringer now sits flush and level.

The guide that use this video

• How to Lay Out and Cut Deck Stair Stringers