powered by

Outside Corner molding Installation (EASIEST WAY)

Video by VCG Construction · 1 moment used in Oak Valley Designs's DIY guides · 0:47 long

Moments in this video

  1. 0:12–0:19 Cut Miter Joints for Outside Corner From How to Install Baseboard Along a Staircase Wall, Step 5: Cut Inside and Outside Corners

    Once the trim board is marked, take it to a miter saw. For an outside 90-degree corner, each piece of trim will require a 45-degree miter cut. Adjust the miter saw to a 45-degree angle. Ensure the cut is made on the correct side of the pencil mark to account for the angle and the length of the trim. The two 45-degree cuts from each trim piece will join together to form a crisp 90-degree outside corner. After cutting, test-fit the two pieces together to ensure a tight seam.

The guide that use this video

More from the Oak Valley Designs DIY Hub

Read the guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Outside Corner molding Installation (EASIEST WAY) — step-by-step moments | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.