Mastering Stair Stringer Layout And How To Avoid These Nosing Mistakes
Video by stairbuilding · 1 moment used in Oak Valley Designs's DIY guides · 7:22 long

Moments in this video
- 3:45–4:47 Correct Straight Stringer Layout
From How to Lay Out a Stair Stringer with a Framing Square, Step 5: Mark the Nosing and Final Cut
This step demonstrates the correct method for laying out a straight stair stringer when incorporating a 1-inch nosing. The stringer's tread cut should be exactly 10 inches deep (to support an 11-inch tread with 1-inch nosing) and the riser height is 7 inches. The treads themselves will be 11 inches long and 3/4 inch thick, with risers also 3/4 inch thick. By laying out the stringer with a 10-inch tread dimension, the 11-inch treads will naturally create the desired 1-inch overhang (nosing) without making the stringer itself too long. This ensures the stair stringer length is accurate for the desired finished stair dimensions.
The guide that use this video
More from the Oak Valley Designs DIY Hub
Read the guide Browse all guides
Planning this project? Shop Oak Valley Designs.

