Installing Newel post and stair railing | Finishing my Basement | Episode 28
Video by Platoon Garage · 1 moment used in Oak Valley Designs's DIY guides · 19:52 long

Moments in this video
- 12:33–14:45 Install Handrail to Newel Post and Wall
From How to Install a Handrail Return at the End of a Rail, Step 5: Mount Handrail Assembly to Wall/Newel Post
The assembled S-turn handrail is now ready for installation. The presenter places the handrail onto the previously installed newel post and wall brackets. He aligns the handrail and then uses a drill to drive screws through the wall brackets into the wall studs, securing the handrail firmly. The end of the handrail is bolted onto the top of the newel post, creating a seamless and sturdy connection. The entire handrail structure is now installed and stable.
The guide that use this video
Transcript
0:16 hey everyone welcome back today's video we're going to be working on installing this newel post we need to do some railing so that way i can get this basement finished and start using it i bought this at lowe's i never done one of these before as i feel like i start every one of my videos i've never done this before so it should be interesting we'll see how this goes i did a bunch of research i've watched a lot of videos hopefully i don't mess this up too bad i feel like i say that all the time as well if you're new to the channel consider subscribing take a look back through some of my old videos if you're doing work at your own house it's probably there's a chance that there's probably something in there that you might find useful to you let's get into this is the new post that i got it is a big mamajamma it's uh
1:03 five and a half inches and that's 56 inches tall so it obviously needs to get cut down because it's going to go right here on the end of this um i got all this basically set up so that i can essentially get this put in here it'll kind of go halfway on this wall and then i'll kind of stand this thing here in this space it'd be something like this but it'll actually be i'm gonna cut it so that it's halfway up and then we'll attach the new to up here um i'm actually going to take this hand railing up it's going to make a 90 degree turn and then another 90 degree turn up and then attach to the wall right there and then on this side i just have
1:48 a regular standard um piece of standard piece of handrail so first thing we got to do is we got to measure this out and see what my height is going to be so i can actually get this right measurement and then we'll i guess we'll get started i've got this piece of hand railing down here and i've marked kind of the level of where this railing is going to be so i've made i've transferred some marks onto here what i've done is this is where the railing is going to go and then i measured from this edge to here which is about six inches so then what i did was i actually measured that uh subtracted six inches away from 35 which is where i want that top to be and then that gave me 29 so i measured
2:34 from here up to here and that gave me my 29 mark then i did a measurement of where the actual railing will go in the middle of this piece and so what now i've got is this is the top and bottom this is three inches apart this is the dead center so this top part of the railing to here is the measurement if you can see that the top part of the railing here is the measurement that i need to actually cut off the bottom which is ten and three quarter inches so removing ten and three quarters of an inch should actually bring this post down so that this railing will be right at 35 inches
3:26 all right i've got this thing marked out here because i'm going to cut it so that it fits up over top of this edge hopefully this is going to work out all right i'm a bit worried about it but we'll see let's go all right now i got all my drawing done here i got my line up on this edge across here and then down on this side so what i'll be doing is now going and cutting across to get this piece off so that way it should fit up against that and when i'll get this piece done i should be able to get this block cut and then fit up against the edge there and then i should in theory be able to put this whole thing together all right i got my set post is in there got it cut so now i need to
4:13 take this block and then cut it so it'll fit into there so that way we'll be able to attach it to this thing yeah let's do that next this one i just re-measured it is three inches short so what i'm going to do is i'm going to lay these out side by side i'm going to make my new measurements and then hopefully not mess this one up wish me luck all right i got it cut down now it's three inches longer than that one
5:00 so now what i have to do is i have to trace this general shape out and get it put onto here that way it matches this and i'll get put on there so far so good anyway uh that is better much better my tape measure here 36 inches from the top of the nose and that'll line up right there on the middle of this well at least i got that one right this time that was a little bit stressful much better job this time
5:48 all right i have now gotten my blocking put in it comes looking like this but you can see it's pretty short it's actually only i don't know this is probably like three inches tall off the ground and i felt like three inches of wood holding on this whole post would not be enough so what i did was especially when you cut it down to get this folded over so i grabbed a piece of 2x6 and i cut it down and then i put a piece of half inch wood to get the right depth so that now this whole thing is nice and flush here what i did was i actually grabbed these concrete screws and i drilled a couple holes where these needed to go and then i put the concrete screws down
6:34 through this and into the concrete so this block is solid two screws into the concrete plus two screws into this knee wall then i have this upper piece of two screws going into that so now when i fit the new post over like this now the new post will go on and i'll put in a screw here i'll put in two one here one there and then one on this end and i think that should do it this thing should be nice and sturdy so i'm gonna do that now i'm gonna pre-drill holes and then i'm gonna get a little flappy paddle and drill that so that way i can kind of countersink in
7:20 the nail so it'll be flush yep all right that's the next step [Applause] [Music]
8:11 so now we'll get the uh get the piece of railing lined up here with this it's going to have a little bend in it that goes around and then up there i actually am going to be joining these two pieces of railing together these came as kind of pre-packaged pieces but in order to go up the rail here and then make a turn and then go up the rail here i need to cut both pieces in order to join them in the middle and i'm using this kit right here called zip bolt zip bolt what it does is it basically puts a bolt through the middle here and then this little bracket you twist it you drill a little hole in there and then this sticks through the middle and then you tighten it all down and it holds these two pieces together very very
8:56 sturdily these pieces are ridiculous thirty dollars each so this is sixty dollars worth of material here just for these two pieces of handrail the wood prices are just crazy right now all right cut here cut here join them together let's go all right here's what they look like after the cuts are made
9:50 so nice pretty good [Music] there it is all one piece this little world uh this little rail bolt system works really well this thing is really strong there's no way it's coming apart now that's so cool did a couple of test drills here with my uh drill bits and stuff and uh that actually worked out pretty well on to the next thing all right so now i got the holes drilled for this where this little guy goes and then the bolt i've already tightened that down so they fit into each other like that
10:37 all right so now i'm just going to apply a little bit of wood glue and drop that down in there line this up get those put together i found using this little screwdriver to hold this bit in place to then get this started helps right set just start to tighten that down
11:39 and then finish the tightening down like that then your last bit is to take the plug put a little bit of glue on that drop the plug down in there try to line up the grain the wood grain a little bit and there you have it all done nice and tight move my laser level here that is the new post installed and the s turn
12:25 now what i need to do here is take a measurement from this edge down to here and then i get my cut and then i can be able to bolt this piece on to this piece and the railing will be secured and then i'll be able to come down here and then drill in my uh little pieces for our balusters get the measurements right and the railing will be mostly done all right i got this last piece cut it was a bit stressful but i got it to cut i got it temporarily lined up here i'll need to get it permanently done and you can see how it fits up against the post there everything's just kind of clamped in place for a moment
13:12 all right so now what i got to do is um i think i'm going to measure where these um where the balusters are going to go because i'll need to put that last clamp bolt in here and i don't know exactly where it is that because i'll have to drill out a 1 inch hole and i want to make sure that the balusters aren't going to go where that hole is going to be so i'm going to measure out i think where these need to go and then make some holes i guess let's do it i got it all together let's take a look this is the piece that's going to attach the new up s turn all the way up to the top so now i'm going to it's all bolted together all one piece now with all of the plugs and stuff put in
13:57 place let's go put it up here and get it installed then [Music]
14:44 ah man all right so now the only thing left is to get these balusters put in pop those bad boys in and then we're done uh well i'm not done then i'll need to get this primed and painted and then i'll have to stain the handrail all right i bought a kit that helps me that helps me to install these metal balusters the metal balancers are half an inch wide and you take these little rubber stopper pieces and actually go on the very end like that so what you're doing is you're going to get yourself
15:29 a three quarter inch bit you can either use a regular drill or a paddle bit either way it works fine and as you saw me doing just a minute ago laying these out with a laser that way these lines that you're going to be putting in will be perfectly straight and your balusters will go in nice and straight as well okay so now what we're going to be doing is drilling holes for this top piece which is a little bit rounded on the end and we're going to measure these we're going to drill these holes then we're going to measure so that we can cut the square end and then that way we'll be able to put these plugs in and then adjust them fit them in and you'll be all done that's it
16:15 these are actually pretty straightforward let's get to it i've already taken measurements and the way that you do these are from the end that has a rounded point
17:01 this is the part that you keep the square it off and is the part that you cut so i've already done my measurements over there it's going to be 30 and a quarter inches so i'm going to take this and lay it out here on my table i'm gonna cut these three balusters at 30 and a quarter inches get my first one measured so 30 and one quarter i'll make my mark long version [Music] actually tried the first one with this
17:46 and this thing just started shaking all over the place and and almost ruined the the post so i just cut it by hand now it's easy all right so now we're going to take this over to the railing and get it installed so now you got your balusters cut you got these little spacers in here what you're going to do is take this little clip and get it put in the bottom like that next piece is to put these on top and bottom make sure they are going in opposite directions of each other like this
18:35 and stuff that that way there we go all right now you're good so what you need to do is you need to twist it counter clockwise in order to expand the screw like this and what that does is that actually allows you to set the screw so that it has strength slide that one down inside that one on top and that's it then you do the next one same thing there you go now you just finish it all the way down
19:20 put the rest of them in done
Automatically transcribed from the source video.
More from the Oak Valley Designs DIY Hub
Read the guide Browse all guides
Planning this project? Shop Oak Valley Designs.

