powered by

How To Fix A Broken Light Switch

Video by ForRent.com · 1 moment used in Oak Valley Designs's DIY guides · 1:45 long

Moments in this video

  1. 0:47–1:01 Disconnect the Wires Connected to the Outlet Switch From How to Install a Motion-Sensor Light Switch in a Stairway, Step 3: Identify and Disconnect Wires

    Before disconnecting any wires, take a photo or make a clear diagram of how the wires are connected to the existing light switch. This is crucial for correctly wiring the new switch. Typically, a single-pole switch will have two hot wires (usually black) connected to the side terminals and a bare copper or green ground wire connected to the green ground screw. Use your flathead screwdriver to loosen the terminal screws and carefully unwrap each wire from its connection point on the old switch. If necessary, use wire strippers to clean up the ends of the wires.

The guide that use this video

More from the Oak Valley Designs DIY Hub

Read the guide Browse all guides

Planning this project? Shop Oak Valley Designs.

How To Fix A Broken Light Switch — step-by-step moments | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.