Go next level DIY with this tool - the Stud Finder
Video by Inspire DIY · 1 moment used in Oak Valley Designs's DIY guides · 4:40 long

Moments in this video
- 3:11–4:40 Utilize an Electronic Stud Finder and Mount Item
From How to Find Studs and Set the Right Handrail Height, Step 2: Locate Wall Studs
The most accurate method involves using an electronic stud finder. Activate the stud finder and calibrate it by holding it flat against the wall where there is no stud. Then, slowly slide the stud finder horizontally along the wall. The device will typically indicate when it detects the edge of a stud and will often show the center of the stud on its screen (e.g., the Jurgen K brand shown features a 'CENTER' indicator). Many modern stud finders also offer additional detection modes, such as for live electrical wires, metal framing, or pipes behind the wall, enhancing safety and accuracy. Once the center of the stud is identified, mark it with a pencil. Then, use a level to mark the desired height for mounting your item (e.g., a shelf). Finally, use a drill and appropriate screws to securely attach your item into the located stud.
The guide that use this video
More from the Oak Valley Designs DIY Hub
Read the guide Browse all guides
Planning this project? Shop Oak Valley Designs.

