Fixing a squeaky floor WITH Carpet? #tools #handyman #contractor
Video by Chris Garage78 · 1 moment used in Oak Valley Designs's DIY guides · 0:58 long

Moments in this video
- 0:38–0:48 Confirm Repair and Concealment
From How to Use a Squeak-Repair Kit on Carpeted Stairs and Floors, Step 6: Test the Repaired Area
After snapping off the screw head, gently run your fingers or hand over the carpet in the repaired area. The broken-off portion of the screw should be completely concealed beneath the carpet fibers, leaving no visible or palpable trace. If you can feel any part of the screw, you might need to try driving another screw nearby or ensuring the snap-off was complete. Finally, walk across the previously squeaky section of the floor. The floorboard should now be securely fastened, and the annoying squeak should be gone, resulting in a solid, noise-free floor.
The guide that use this video
More from the Oak Valley Designs DIY Hub
Read the guide Browse all guides
Planning this project? Shop Oak Valley Designs.

