Extra Wide Walk-Thru Pet Gate with Lift Handle - Install Tutorial - Carlson Pet Products
Video by Carlson Pet Products · 1 moment used in Oak Valley Designs's DIY guides · 2:15 long

Moments in this video
- 1:27–1:39 Tighten Spindle Rods for Secure Installation
From How to Install a Pressure-Mounted Gate at the Bottom of Stairs, Step 5: Apply Pressure and Secure
Once the wall cups are installed (if used) or if you're pressure-mounting directly to the wall, reposition the gate in the opening. Begin to tighten each of the four spindle rods by turning their adjustment knobs. Tighten them evenly, alternating between sides and top/bottom, until the gate is securely held in place. The gate often has a visual indicator, such as a gap in the latch mechanism, that should close completely when adequate tension is achieved. Ensure all four rods are snug against the wall or wall cups.
The guide that use this video
More from the Oak Valley Designs DIY Hub
Read the guide Browse all guides
Planning this project? Shop Oak Valley Designs.

