DIY Under Cabinet Lighting - Full Walkthrough

Moments in this video

1. 1:47–5:03 Connect LED Strips (Plug-and-Play or Soldering) From Staircase Lighting, Step 3: Connect LED Strips

   For connecting multiple LED strip sections, you have two main options: plug-and-play connectors or soldering. For plug-and-play, cut a strip at a cut point, insert each end of the LED strip into the transparent connector, and press down on the silver clamps with pliers to secure the connection. To connect two strips separated by a distance, insert the strip ends into the connector, then insert 18-gauge red and black wires into the other side of the connector and clamp them. For longer distances, you can extend these wires by cutting them in the middle, stripping all four ends, and using WAGO connectors to splice in additional lengths of 18-gauge silicone wires. Test the connections by temporarily plugging in the setup.

2. 10:29–12:12 Final Wire Management and Testing From Staircase Lighting, Step 7: Conceal Wiring

   For any remaining visible wires inside the cabinets, such as those routed between shelves or along cabinet walls, use basic track cable concealers to create a tidy and unobtrusive appearance. This helps maintain a clean look, especially for wires that need to run from the upper cabinets down to the lower sections. Ensure the wires are securely fastened within the concealers and that the concealers are discreetly placed.

The guide that use this video

• Staircase Lighting