DIY - Rolling / mobile Drill Press Cabinet
Video by Stuff I Made · 1 moment used in Oak Valley Designs's DIY guides · 8:31 long
Moments in this video
- 6:31–6:47 Attaching Drawer Pulls (Knobs)
From Under Stair Storage, Step 7: Attach Handles and Finish
Align and attach the drawer pulls (knobs) to the front of each drawer. Use masking tape to mark the desired position for each pull, ensuring consistent spacing and height across all drawers. Pre-drill pilot holes through the drawer fronts at the marked spots using a small drill bit. Then, secure the drawer pulls by threading their screws through the inside of the drawer fronts and tightening them with a screwdriver or impact driver. Carefully remove the masking tape once all pulls are securely attached.
The guide that use this video
More from the Oak Valley Designs DIY Hub
Read the guide Browse all guides
Planning this project? Shop Oak Valley Designs.
Subscribe for exclusive updates
Be the first to know about promotions, new products, and sales.