powered by

Concrete Stairs Are Colored, Sealed, And Done ✅

Video by Hometown Acres · 1 moment used in Oak Valley Designs's DIY guides · 12:51 long

Moments in this video

  1. 0:13–0:35 Clean Concrete Stairs From How to Resurface Worn Concrete Steps, Step 1: Inspect and Clean Concrete Steps

    Thoroughly clean the concrete stair treads using a pressure washer. This step is crucial for removing all dirt, dust, and debris, ensuring a pristine surface for the subsequent application of acid stain and sealer. Pay attention to corners and textured areas to ensure complete cleanliness.

The guide that use this video

Transcript

0:02 hey everybody Adam here with Hometown Acres welcome back winner is fast approaching and we've got to get these concrete stairs colored and sealed all right guys this video is not going to be a how-to acid color concrete video there's a whole bunch of concrete professionals out there that I'm sure are going to do a much better job than I am but this is going to be a representation of what a first-time

0:48 homeowner who has done a little bit of research is going to look like doing this and what you might expect if you're going to try to tackle something like this if we make any mistakes along the way we'll be sure to share them with you but essentially we're just going to be reading the directions and doing what it says to do as far as what this ever stain product says everstain is a true reactive acid stain that chemically changes the color of the concrete works well on most concrete finishes and is known best for its ability to create marbled variations of color that are unique to every concrete surface apply with an all plastic parts pump sprayer spray on two Thin coats and circular motion with irregular overlaps uh allow color to develop for four to six hours and then neutralize the stain

1:33 with a pro clean neutralizer uh that would just be another product you have to buy from them which is supposedly a lot more expensive but a much cheaper alternative that we have found through research is just to use ammonia and that will neutralize the acid in this but basically from what I understand you put this on let the acid change the chemicals in the concrete it colors it the longer you allow it to sit on there before you put the ammonia neutralizer on there the darker it's going to get so when you are happy with the color that is when you go in put the neutralizer on it and it will stop the acid from continuing to darken now the color on this is called Malayan buff and it almost looks like Mountain Dew if

2:20 I'm being honest kind of a lemon lime looking color um kind of like a highlighter color but once we get it on there and the Sun starts to hit it it should start to change to the brown color that we're going for now I have no idea if this acid is going to destroy this sprayer but it was only ten dollars from Home Depot so we're gonna give it a try try to get it down as quickly as we can and see if we can use that disposal I don't want to go out and buy any special sprayer for this because if it does destroy it this is going to be a

3:05 one-time use for us let's go ahead and get this on here and start to see what it looks like I kind of like the little handheld thing here this is

4:07 [Music] foreign [Music] buff looks like Malayan Malayan

4:53 immediately after applying two coats they do say that it's going to end up looking exactly like it looks when it's wet not when it's dry but like I said we're going to give this about four to six hours before we put that neutralizer on it so we'll see how much different it looks in four to six hours from with us right now and then whenever you go to apply your sealer they say it's really supposed to make that color pop all right so it has been exactly four hours and as you can see we have achieved so much more color than we did with that dry powder colorant that we used when we were stamping the concrete this is more of what I had in mind when we started this project as far as color goes so we have two more steps left to do the first one is going to be to give this a quick rinse and wash off any excess

5:45 now that we have sufficiently rinsed the steps you can kind of get more of an idea of what these are going to look like once they are sealed because sealing them is going to give them more of that wet look so it's going to be darker brown than what we showed you earlier just like this is right here now we need to go ahead and neutralize the acid and from again research that I have done I'm not saying this is how you should do it but from what other people have said that you should do is to mix one part of ammonia to eight parts of water so I've got eight quarts in this bucket and we're going to fill it up until it says nine quarts and then we are going to spread that around and really rub that into the concrete and what I'm going to be using to spread this around and massage it into the concrete is my wife's favorite mop

6:43 if you can't tell I haven't done much mopping in my lifetime let's do a little of this action gonna make sure we get the face of these steps too [Applause] [Music] so this is what it looks like after we

7:29 neutralize the acid all we have left to do now is let it dry overnight hope for no rain tomorrow and get some sealer on it get this project wrapped up before winter gets here all right guys it is the next morning and as you can see the stairs are completely dry and we're about ready to start sealing as you can see they have definitely lightened in color hopefully when we go ahead and put the sealer on it darkens them back up to that nice dark brown but one thing we need to do first is take a quick leaf blower and just blow off any excess dirt dust and debris that may have landed on here overnight so the product we're going with today is called this Walt tools stamp Sheen 350. and uh one thing that I have heard that most people get into trouble with when

8:15 they go to seal concrete again I've never done this before so this is just what I've heard is they put it on too thick and that causes extreme bubbling and hazing uh so when we go and put this coat on we're really gonna try uh to go very thin even if that means not hitting some spots as heavy as we'd like uh we'll just come back and hit it with a second coat after the first code has had a chance to set up all right so let's see how this goes and hopefully we don't screw this up in the 11th inning [Applause]

10:07 so that was the first coat we've let it set now for about 40 to 50 minutes word to the lies don't start when you've never done something before on the step that most people are going to see first as you can see we spilled a little bit here we had uneven spray patterns on this first step once we got to the second third and fourth step we started to get into a little bit more of a rhythm so now I know what I'm doing hopefully we can smooth this out a little bit but again we don't want to put it on too thick

11:27 guys there we go the concrete steps are finally finished they took about three weeks start to finish to pour all of these steps one at a time stamp them and then after they were done and cured we pressure washed them colored them and sealed them and now they are well protected for winter the color came out pretty good I mean they're a little bit more orangey than I wanted I was kind of hoping for it to match the color of you know the trim work up there in that Gable but uh still looks pretty good I'm happy with it it Blends in well with the Sandstone makes these rocks along the side here pop a little bit more and overall I think I'm pretty happy with it is it a professional job absolutely not if I would have paid somebody to come in here and do it I'm sure it would have come out a lot better than it did but for doing it myself I'm happy with it and I can take pride in in

12:12 the work that we did here and knowing that we did it ourselves but I think that's going to wrap up some of the Landscaping videos for at least the remainder of this year I'm sure you guys are getting tired of watching hardscaping Landscaping videos we'll get back to wood cutting and saw milling videos here shortly speaking of wood cutting and saw milling uh just another reminder we're going to be at the Paul Bunyan show Friday October 6th we'll be there most of the day we're going to have a schedule two hours at the Mezza machines Booth from 11 to 1. so if you guys are in the area or if you want to make the trip out I'd love to meet you hopefully you guys enjoyed this one if you did give me a big thumbs up click that subscribe button and we'll catch you on the next one thanks for watching

Automatically transcribed from the source video.

More from the Oak Valley Designs DIY Hub

Read the guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Concrete Stairs Are Colored, Sealed, And Done ✅ — step-by-step moments | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.