Concrete slab in 60 seconds #shorts #diy #concrete #diyconcreteslab

Moments in this video

1. 0:30–0:42 Pour and Level Concrete From How to Pour a Concrete Landing Pad for Deck Stairs, Step 5: Mix and Pour Concrete

   Carefully pour the mixed concrete into the formwork, distributing it evenly over the reinforcement wire and crushed rock base. Use a shovel or rake to spread the concrete as you go, ensuring it fills all corners and voids. Once the form is mostly full, use a straight edge, such as a flat 2x4, to screed the concrete. This involves moving the 2x4 across the top edges of the formwork in a sawing motion to level the concrete and remove any excess, creating a flat surface. Periodically check for low spots and add more concrete as needed, then screed again until the entire surface is level with the top of the formwork.

The guide that use this video

• How to Pour a Concrete Landing Pad for Deck Stairs