powered by

Concrete Cracks & Resurfacing

Video by Today's Homeowner with Danny Lipford · 1 moment used in Oak Valley Designs's DIY guides · 2:58 long

Moments in this video

  1. 1:07–1:26 Fill Concrete Cracks From How to Resurface Worn Concrete Steps, Step 2: Repair Cracks and Damage

    Prepare the concrete crack filler by pouring the Quikrete patching material into a 5-gallon bucket. Gradually add water while mixing with a mixing paddle attached to a half-inch chuck drill. Continue mixing until a fairly thick, spreadable consistency is achieved, similar to cookie dough. This thick mixture is then carefully poured directly into the cleaned concrete cracks. Use a flat-edge trowel to force the material deep into the cracks, ensuring it fills all voids, and then smooth out the surface flush with the surrounding concrete. This prepares the cracks for a seamless resurfacing.

The guide that use this video

More from the Oak Valley Designs DIY Hub

Read the guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Concrete Cracks & Resurfacing — step-by-step moments | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.