Backyard Bonanza PT 3 - Paver Patio, Finished Ceiling, and Cable Railing Install
Video by Premier Outdoor Living · 1 moment used in Oak Valley Designs's DIY guides · 11:47 long

Moments in this video
- 10:36–10:55 Trim Excess Cable & Install End Caps
From How to Tension and Adjust Stair Cable Railing, Step 8: Final Inspection and Trim Excess Cable
Once all cables are properly tensioned and you have verified their uniformity and tautness, use heavy-duty pliers or specialized cable snips to trim any excess cable wire that extends past the tensioning fittings. The cut should be clean and flush with the fitting or trimmed to a specified length as per the manufacturer's instructions. After trimming, press or screw on the decorative end caps, often referred to as 'buttons', over the exposed tensioning hardware. These caps not only conceal the hardware for a cleaner aesthetic but also provide a smooth, polished, and safe finish to the completed cable railing.
The guide that use this video
Transcript
0:02 [Music] what's going on everybody welcome back to the vlog we have a very exciting episode for you here today we're going to be finishing up this techo block patio we have some crazy diamond designs going in the fire pit area we're going to do some more work on the decorators deck and we've got the ufp edge ceiling going in so make sure you make sure make sure you hit subscribe stay tuned so we're getting a good amount of this patio down we got some of the bones of this design down and now we're starting to get to some of the really cool stuff we have this industrial border going around we've got these larger slabs
0:48 we've got a double border of that onyx black and right here inside the fire pit area that's where we're going to transition into this diamond paver which is going to be awesome so let me show you the little mix we got so inside the fire pit area we're going to transition to that diamond and we're going to use three different colors and two different textures so we have the shale gray we have the grade nickel and then this i believe it's called charcoal this charcoal has the granitex finish on it so it's a little bit rough a little bit more modern look i think it's going to set it off really nicely so we're going to do about 40 40 20 split so we'll do two of these to two of these to one of these and we'll just try to keep that consistent pattern still going to be random but we want to make sure that we're keeping it consistent we don't have too much of a grouping in one area of one product
1:35 [Music] what are you doing building the bar build a bar let's check it out oh look at that oh that's going to be nice so he's working on the bar here as he told you a little waterfall detail here we're having this outside border waterfall down both sides mitered in the corner and then coming out here and what we're doing is sierra tundra tundra tundra so it lines up with these boards you can see this goes right down right to our border and we're going to have tundra come up here i think it's
2:22 gonna look awesome what do you think a ton of tundra so much tundra he's gonna work on this i'm gonna work on the patio it's starting to come together baby so i'm gonna get the drone up there pretty soon can't wait to see it oh yeah so the detail that we were going for in this area now that we're getting to the fire pit inlay section we wanted all full pieces of these industrial slabs so we went off of that that means that we're gonna have to have some cuts on this diamond that's going to be inside the fire pit area the only thing that i want to make sure of with that is that
3:09 we have even cuts on both sides so this is how i'm figuring that out i just measured it it's 94 by 94. two things i want to start the layout so that it's centered this way and this way so we're going to have the same cuts here here basically all four sides it's going to be the same cut so what i want to do the diamond paper is a little bit a little bit weird in the shape so what i want to do from here to here if i go straight across that's 10 inches so this is our middle point of the patio so i'm gonna start
3:54 five inches from one point so this is the center running in this direction now i need to figure out what our total overall run is with these pavers so that we have the same rip on both sides so each one of these is about six and an eighth with the gap we have 94 inches so let's do some math here we'll just start 94 divided by six 15.6 so gonna be 16 so i'll do 15 times 6.125 that's an eighth that gives us 91.78 that equals 85 and three-quarter and give me some math on that 94 85 and three-quarter 40 what no 94 minus 85 and three-quarter 94 minus 85 and three-quarter equals 8.25
4:43 that is what 8.25 is what we need to make up on those two end cuts so we'll divide that by two so each one of our rips is gonna be four and an eighth so we'll start with this about six and an eighth so we're just going to cut this down to four and an eighth and then we'll have a four and an eighth piece here four and an eighth piece here we'll start in the center and then our layout's going to be dictated and we'll have the same cuts on both ends and uh it's gonna look like we planned it out because we did and check this out we got this three piece design going in it's gonna be tight
5:43 [Music] you can see we're starting to cut in all of our border pieces of diamond we figured with this outside border it's a little bit complicated to figure out all of these cuts pick them up and put them on the iqs also so we just actually took out this onyx black border laid the papers a little bit long and then cut it with the demo saw always run that with a hose keep that dust down baby so it's looking good we got some slight adjustments to make on it once we get everything in straighten it up a little bit but it's looking dime in tight a couple more cuts along this edge but uh it's looking really good and anthony's on to something exciting what do you got going on there aunt trying to read directions on a tv map not any tv email tv manic goes on the ceiling what yeah right and what you need to put the blocking in
6:28 oh cool what do you think got a little bit of it installed i like it yeah it's a nice product you're a fan big fan fan's going to go here anthony and the ceiling fan so we're using their thermally modified collection here this is the glacier color and it's actually can also be used as an exterior siding product so because we could have some weather exposure on this wall and we wanted it to be the same material we just used that thermally modified for everything and uh i think it's looking awesome so far it's a nice rustic look contrast with a nice clean pvc really well i'm really digging it if you're into that modern farmhouse this is it modern farmhouse modern modern murder what bro what are you talking about man all right so back to the tv mount so we found the center of the room because
7:14 that's where they want to hang the tv right now i'm just going through the directions to see how far the mount needs to be off of the beam so when the tv comes down it has the clearance and you can see there's no wood to screw to so i'm going to do some math figure out best location add some wood make sure it's all nice and good so we can lock it in for justice all right so we're gonna get all our posts installed for this and then we'll put the top rail on and then we can get our cable in and hopefully we should have all the cables up by the end of the day see we're making some really good progress on this ufp edge ceiling so we're working backwards to the end josh is back there he's cutting out some holes for some speakers so we're going to get those installed then we can work towards the wall we'll go down there and hopefully we have that done by the end
8:00 of the day as well lot going on stay tuned [Music] so [Music] again our last couple pieces of this ufp edge up on the wall looking good there anthony get in there get in there baby see we got these wires
8:47 popping out of the wall that's going to be for our infrared heaters they get hardwired right into the unit so uh getting closer we got some speakers installed that's going to be pretty sweet we've got all of our cutouts for our lights so those will get popped in pretty soon here fan in the middle and then we've got a really nice little treat for you here motorized tv mount on the ceiling how you doing there scooter i'm all right that's good to hear you know first board of the day oh yeah got our decorators cable rail up here got it all ready to go we'll be tensioning it soon so uh i'll show you how we do that but it's looking good it's all coming together here well we've got this decorator's cable rail almost finished up the last thing that i'm doing is tensioning these cables so i'll
9:32 quickly show you how to do that show you they just go in put this bolt on the end there's a fitting on the other end and then once they're all set you tighten them so you just have an allen key and a set of pliers the one thing that you want to be conscious of you don't want to spin the allen key because that is going to spin the wire so you really just want to turn this nut on here that's going to tighten it with a little workaround i like to do spin it like this back so you're kind of spinning the cable but you're setting it back to where it was first time we did it put an allen key bit on there and started spinning it with a drill it went really fast but spun the wire up and that was no good so this is the best way to do it you just want to start in the middle go up and down evenly and then you'll do another check at the end make sure
10:18 all of them are nice and tight you can see these two are tight and that's the play that i have so just gonna go up and down tighten them up be good to go now that we have them all tensioned we can cut off the slack you can see the extra run of cable you want a nice heavy duty set of snippers here i don't know what you call these wire cutters i don't know they're just heavy duty pliers [Music] finish it off with our little button boom toss it [Music]
11:09 well that's it for this vlog you're gonna have to tune into the next one to see all the final details in the next episode we're really gonna focus on building a gas fire pit so it's gonna be a really cool one make sure you hit subscribe stay tuned and until next time this is premiere outdoor living [Music] you
Automatically transcribed from the source video.
More from the Oak Valley Designs DIY Hub
Read the guide Browse all guides
Planning this project? Shop Oak Valley Designs.

