Aluminum French Cleat Picture Hangers Extra Heavy Duty 12 Inch - How to Hang Heavy Mirrors on Wall
Video by DaTools · 1 moment used in Oak Valley Designs's DIY guides · 1:21 long

Moments in this video
- 0:15–0:34 Locate Wall Studs
From How to Hang Heavy Pictures on Drywall in a Stairwell, Step 1: Locate Wall Studs
Before hanging a picture or mirror, especially heavy ones, it's crucial to locate wall studs for maximum security. Use a stud finder to locate the left and right edges of any studs behind the wall. Mark these edges with a pencil. Remember that typical stud spacing is 16 inches on center. When hanging heavy items, ensure at least one screw of the wall-mounted cleat is anchored directly into a stud for stability.
The guide that use this video
Transcript
0:01 detoul's french cleat hanger's extra heavy duty is made of aircraft aluminum thickness three millimeters and interlocking depth almost three centimeters the 12 inches cleat hanger includes six half inch and four one inch screws and four plugs anytime you are hanging a picture or mirror on a wall you should first find a stud in the wall to make it more secure using a stud finder to find left and right edge of the stud and mark edge lines usually the stud spacing is 16 inches when hanging heavy paintings or cabinets make sure at least one screw is installed in the studs use half an inch screws provided or your own screws to attach the bracket to the frame in the smaller holes attach the bracket on the wall using a level to make the cleat level mark the hole points with a pencil
0:48 drill holes on the wall if needed attaching the bracket and tighten screws after leveled use bolts and your own fasteners if the provided fasteners are not strong enough hang the picture adjust left or right until desired position is achieved the picture is nearly flush to the wall install bumpers at corners if the bottom of picture scratches the wall
Automatically transcribed from the source video.
More from the Oak Valley Designs DIY Hub
Read the guide Browse all guides
Planning this project? Shop Oak Valley Designs.

