Secure Mounting Brackets (Side 2)

What happens in this clip

Align the top and bottom mounting brackets on the second side with their respective pilot holes. Securely attach both brackets to the wall using the corded drill and the provided screws. These brackets are designed to allow the gate to 'click' or slide into place, so ensure they are oriented correctly for easy attachment and removal of the gate. Similar to the first side, tighten screws firmly but avoid over-tightening the plastic.

Goal: Securely attach the remaining mounting brackets to the wall.

What's used

Tools

• Bottom mounting bracket (assembled) Regalo
• Corded drill Black & Decker
• Screwdriver
• Screws Regalo
• Top mounting bracket (assembled) Regalo

About the full video

This project provides verbose step-by-step instructions for installing a Regalo Extra Tall Top of Stair Metal Walk-Through Safety Gate (Model #1255 B DS, Black) at the top of a staircase. The process includes assembling the gate, preparing and securing the mounting hardware to the wall, adjusting the gate's width and fit, and performing final checks for smooth and secure operation.

Step 5 of 6: Attach Gate to Brackets

Carefully lift the baby gate and align its corresponding mounting points with the installed brackets. Follow the manufacturer's instructions for your specific gate model to attach it to the brackets. This may involve sliding the gate onto posts, clicking it into place, or using additional fasteners. Ensure the gate is securely attached and does not wobble.

Open this step in the guide

Every video in How to Install a Hardware-Mounted Baby Gate at the Top of Stairs

1. Step 1: Identify Mounting Surfaces

   • 0:24–0:31 Install Lower Wall Mounts (First Side)
   • 0:13–0:18 Prepare Mounting Boards
   • 0:23–0:32 Install Wall-Mount Baby Gate

2. Step 2: Mark Bracket Positions

   • 2:59–3:10 Mark, Drill, and Secure Top Mounting Bracket (Side 1)
   • 1:21–1:35 Position Gate and Mark Wall
   • 1:26–1:45 Position Gate and Mark Wall

3. Step 3: Drill Pilot Holes

   • 1:05–1:12 Mark and Drill Wall Holes
   • 1:50–2:02 Mark and Drill Bottom Pilot Holes (Side 1)
   • 1:18–1:48 Drill Pilot Holes and Insert Anchors

4. Step 4: Attach Mounting Brackets

   • 1:43–1:50 Secure Wall Brackets
   • 3:44–4:19 Secure Mounting Brackets (Side 2)
   • 3:14–3:37 Mount the Bracket to the Wall

5. Step 5: Attach Gate to Brackets

   • 3:44–4:19 Secure Mounting Brackets (Side 2) (this video)
   • 1:48–1:55 Mount the Gate into Brackets
   • 3:37–4:15 Install the Safety Gate

6. Step 6: Adjust and Test Gate Functionality

   • 17:06–18:29 Test Gate Functionality and Latch
   • 1:30–2:19 Final Assembly and Testing
   • 3:49–4:22 Verify Security and Functionality