Record All Measurements on Template

What happens in this clip

Using a measurement sheet or a blank piece of paper with a general 'U' shape drawn, transpose all the exact measurements obtained from the taped-off area onto the drawing. Include the width of the ascending/descending runner sections (e.g., 26 inches), the length of the middle section at the landing (measured from tape line to tape line, e.g., 13 3/16 inches), the total length of the back section (e.g., 65 inches), and the depth of the landing section (e.g., 24 3/4 inches). Ensure all dimensions are clearly noted on the diagram.

Goal: Transfer all measured dimensions, including runner widths, middle section length, total back length, and landing depth, onto a provided U-shaped template diagram.

What's used

Tools

• Clipboard
• Paper Template
• Pencil

About the full video

This video provides a detailed guide on how to accurately measure and create a template for a U-shaped stair runner landing. It demonstrates marking the center, outlining the runner's width with painter's tape on both the lower and upper sections, and then transcribing these precise measurements onto a schematic drawing to ensure a custom-fit carpet installation.

Step 3 of 4: Note any obstructions or irregular shapes

Carefully examine the landing for any features like railings, built-in furniture, or angled walls. Measure the distance from these obstructions to the edges of the landing. Sketching the landing area and noting these measurements can be helpful.

Open this step in the guide

Every video in How to Measure for a Landing Rug or Landing Pad

1. Step 1: Measure the landing width

   • 0:08–0:13 Measure the Width
   • 0:13–0:17 Measure the Length/Height
   • 1:38–3:34 Measure Horizontal House Dimensions

2. Step 2: Measure the landing depth

   • 1:04–2:19 Measure Top Landing Dimensions
   • 8:46–9:51 Measure Half Landing (Sub-Landing)
   • 0:26–1:13 Measure the Stairs

3. Step 3: Note any obstructions or irregular shapes

   • 1:04–2:19 Measure Top Landing Dimensions
   • 0:25–0:54 Sketching Deck Sections and Constraints
   • 3:09–4:52 Record All Measurements on Template (this video)

4. Step 4: Determine the desired rug size

   • 1:12–1:47 Select Appropriate Rug Size
   • 0:44–2:29 Determine the Right Rug Size
   • 1:34–1:49 Determine Rug Shape and Size