Measure Top Landing Dimensions

What happens in this clip

First, measure the overall width of the top landing. Extend the tape measure from one wall to the furthest point on the opposite side, including any baseboards or door frames. In this case, the width is 6 feet 6 inches. Next, measure the length of the top landing. From the edge of the first step, extend the tape measure to the furthest point, which may be a doorway or wall. In this video, the length is 6 feet. Record these measurements as 'Top Landing' (TL) along with the pile direction (e.g., 6'6" x 6' ↓). Always add extra material (e.g., 6 inches) to your exact measurements for cutting and tucking purposes.

Goal: Begin by measuring the width and length of the top landing, ensuring you account for the furthest points including any doorways.

What's used

Tools

• Notebook/Paper
• Pencil
• Tape Measure

About the full video

This video provides detailed instructions on how to measure winder stairs (angled or pie-shaped steps) for carpet installation, considering pile direction and allowing for extra material during cuts. It covers measuring top landings, straight stairs, winder steps, and half landings, culminating in creating a custom carpet plan based on these precise measurements.

Step 3 of 4: Note any obstructions or irregular shapes

Carefully examine the landing for any features like railings, built-in furniture, or angled walls. Measure the distance from these obstructions to the edges of the landing. Sketching the landing area and noting these measurements can be helpful.

Open this step in the guide

Every video in How to Measure for a Landing Rug or Landing Pad

1. Step 1: Measure the landing width

   • 0:08–0:13 Measure the Width
   • 0:13–0:17 Measure the Length/Height
   • 1:38–3:34 Measure Horizontal House Dimensions

2. Step 2: Measure the landing depth

   • 1:04–2:19 Measure Top Landing Dimensions
   • 8:46–9:51 Measure Half Landing (Sub-Landing)
   • 0:26–1:13 Measure the Stairs

3. Step 3: Note any obstructions or irregular shapes

   • 1:04–2:19 Measure Top Landing Dimensions (this video)
   • 0:25–0:54 Sketching Deck Sections and Constraints
   • 3:09–4:52 Record All Measurements on Template

4. Step 4: Determine the desired rug size

   • 1:12–1:47 Select Appropriate Rug Size
   • 0:44–2:29 Determine the Right Rug Size
   • 1:34–1:49 Determine Rug Shape and Size