Measure the Length/Height

What happens in this clip

Next, measure the length or height of the same area. This measurement should be perpendicular to the width you just measured. For a room, this would be the length from one end of the room to the other. For a wall, it would be the height. Again, use a measuring tape and record this measurement accurately.

Goal: Obtain the length or height measurement of the area

What's used

Tools

• Measuring Tape
• Yardstick

About the full video

This instructional video explains the fundamental method for calculating square footage, a crucial skill for various DIY projects. The process involves taking two perpendicular measurements (width and length/height) of a given area and multiplying them together to determine the total square footage. This calculation is essential for estimating material quantities for projects such as flooring, painting, insulation, or finishing basements and crawl spaces.

Step 1 of 4: Measure the landing width

Using a measuring tape, carefully measure the width of the landing from one side to the other. Record this measurement accurately.

Open this step in the guide

Every video in How to Measure for a Landing Rug or Landing Pad

1. Step 1: Measure the landing width

   • 0:08–0:13 Measure the Width
   • 0:13–0:17 Measure the Length/Height (this video)
   • 1:38–3:34 Measure Horizontal House Dimensions

2. Step 2: Measure the landing depth

   • 1:04–2:19 Measure Top Landing Dimensions
   • 8:46–9:51 Measure Half Landing (Sub-Landing)
   • 0:26–1:13 Measure the Stairs

3. Step 3: Note any obstructions or irregular shapes

   • 1:04–2:19 Measure Top Landing Dimensions
   • 0:25–0:54 Sketching Deck Sections and Constraints
   • 3:09–4:52 Record All Measurements on Template

4. Step 4: Determine the desired rug size

   • 1:12–1:47 Select Appropriate Rug Size
   • 0:44–2:29 Determine the Right Rug Size
   • 1:34–1:49 Determine Rug Shape and Size