Measure and Cut Carpet Pieces

What happens in this clip

Based on the stair measurements, lay out the carpet and carefully cut it into individual pieces for each tread and riser. It's often recommended to cut the carpet slightly larger than the exact dimensions to allow for adjustments and trimming. Use a metal straight edge to guide a sharp utility knife for precise, straight cuts through the carpet backing. Ensure the carpet pile direction is consistent for all stair pieces.

Goal: Prepare carpet sections for each stair tread and riser

What's used

Tools

• Carpet
• Measuring Tape Stanley
• Metal Straight Edge
• Utility Knife Roberts

About the full video

This DIY project provides a detailed guide on how to install carpet on a staircase, covering all necessary steps from preparing the stairs with tack strips and underlay to precisely cutting and securing the carpet. The process involves measuring, cutting, stapling, stretching, and tucking the carpet for a professional finish.

Step 3 of 6: Cut Carpet Treads

Lay the carpet tread material flat on a protected surface. Using a sharp utility knife or heavy-duty scissors, carefully cut along the marked lines. Make sure to cut cleanly and precisely to achieve edges that will fit snugly against the porch step and adjacent treads.

Open this step in the guide

Every video in How to Install Carpet Treads on Covered Porch Steps

1. Step 1: Clean Porch Steps

   • 0:34–0:40 Clean the Stairs
   • 0:04–0:07 Clean the Staircase
   • 0:36–0:41 Clean and Smooth Stairs

2. Step 2: Measure and Mark Carpet Treads

   • 7:20–9:07 Measure and Cut Carpet
   • 2:09–3:19 Measure and Cut Carpet Pieces
   • 0:46–1:05 Measure and Cut Underlayment

3. Step 3: Cut Carpet Treads

   • 8:08–9:23 Cut Carpet Pieces
   • 1:33–1:54 Cut Carpet to Size
   • 2:09–3:19 Measure and Cut Carpet Pieces (this video)

4. Step 4: Apply Adhesive to Steps

   • 0:09–0:25 Apply Flooring Adhesive
   • 0:05–0:08 Apply Spray Adhesive
   • 0:21–0:28 Apply Adhesive to Stair Tread

5. Step 5: Position and Press Carpet Treads

   • 0:04–0:06 Install Carpet Treads
   • 0:21–0:26 Press Down Firmly
   • 0:06–0:14 Install Carpet Treads

6. Step 6: Secure Edges (Optional)

   • 0:02–0:06 Apply Anti-Slip Strip
   • 7:23–7:44 Secure Step Treads with Adhesive