Clean the Stairs

What happens in this clip

Before installing the stair treads, ensure the stairs are thoroughly clean. Use a vacuum cleaner to remove any dust, dirt, pet hair, or debris from the surface of each stair. A clean surface is crucial for the adhesive on the treads to bond properly.

Goal: Prepare the stair surface for tread installation.

What's used

Tools

• Vacuum Cleaner
• Broom and dustpan

About the full video

This project guides you through installing carpeted stair treads to enhance safety and prevent slips on hardwood stairs, particularly when there are young children or pets in the home. The process involves thorough cleaning of the stairs, precise measurement and marking for consistent tread placement, and secure application of the adhesive-backed treads.

Step 1 of 6: Clean Porch Steps

Before installing carpet treads, it is crucial to prepare the porch steps. Use a stiff brush or broom to sweep away loose dirt and debris. For stubborn grime or old finishes, a power washer or a stiff brush with a cleaning solution (like a mild detergent and water) may be necessary. Rinse the steps thoroughly and allow them to dry completely before proceeding.

Open this step in the guide

Every video in How to Install Carpet Treads on Covered Porch Steps

1. Step 1: Clean Porch Steps

   • 0:34–0:40 Clean the Stairs (this video)
   • 0:04–0:07 Clean the Staircase
   • 0:36–0:41 Clean and Smooth Stairs

2. Step 2: Measure and Mark Carpet Treads

   • 7:20–9:07 Measure and Cut Carpet
   • 2:09–3:19 Measure and Cut Carpet Pieces
   • 0:46–1:05 Measure and Cut Underlayment

3. Step 3: Cut Carpet Treads

   • 8:08–9:23 Cut Carpet Pieces
   • 1:33–1:54 Cut Carpet to Size
   • 2:09–3:19 Measure and Cut Carpet Pieces

4. Step 4: Apply Adhesive to Steps

   • 0:09–0:25 Apply Flooring Adhesive
   • 0:05–0:08 Apply Spray Adhesive
   • 0:21–0:28 Apply Adhesive to Stair Tread

5. Step 5: Position and Press Carpet Treads

   • 0:04–0:06 Install Carpet Treads
   • 0:21–0:26 Press Down Firmly
   • 0:06–0:14 Install Carpet Treads

6. Step 6: Secure Edges (Optional)

   • 0:02–0:06 Apply Anti-Slip Strip
   • 7:23–7:44 Secure Step Treads with Adhesive