Apply Anti-Slip Strip

What happens in this clip

Carefully peel back a section of the protective backing from one end of a pre-cut anti-slip strip. Align the exposed adhesive side of the strip along the edge of the stair, ensuring it is straight and centered. Slowly press the exposed part of the strip onto the stair, working from one end to the other, while gradually peeling off the rest of the backing. Once the entire strip is in place, firmly press down along its entire length with your hands to ensure good adhesion and to remove any trapped air bubbles.

Goal: Secure the anti-slip strip firmly to the stair edge

What's used

Tools

• Hands
• Squeegee

Materials

• Anti-slip staircase guard strip

About the full video

This project demonstrates the simple process of installing anti-slip "staircase guards" to prevent slips and falls on stairs. It involves preparing the stair surface, applying self-adhesive strips to the edge of each step, and trimming them to fit, significantly enhancing stair safety.

Step 6 of 6: Secure Edges (Optional)

If your treads do not have an integrated anti-slip backing or if you desire extra security, consider using weather-resistant staples along the underside edge of the tread where it meets the riser. Alternatively, outdoor-rated adhesive strips can be applied to the edges for additional hold. Ensure any fasteners or adhesives used are suitable for outdoor conditions and will not cause damage to the carpet tread or the step material.

Open this step in the guide

Every video in How to Install Carpet Treads on Covered Porch Steps

1. Step 1: Clean Porch Steps

   • 0:34–0:40 Clean the Stairs
   • 0:04–0:07 Clean the Staircase
   • 0:36–0:41 Clean and Smooth Stairs

2. Step 2: Measure and Mark Carpet Treads

   • 7:20–9:07 Measure and Cut Carpet
   • 2:09–3:19 Measure and Cut Carpet Pieces
   • 0:46–1:05 Measure and Cut Underlayment

3. Step 3: Cut Carpet Treads

   • 8:08–9:23 Cut Carpet Pieces
   • 1:33–1:54 Cut Carpet to Size
   • 2:09–3:19 Measure and Cut Carpet Pieces

4. Step 4: Apply Adhesive to Steps

   • 0:09–0:25 Apply Flooring Adhesive
   • 0:05–0:08 Apply Spray Adhesive
   • 0:21–0:28 Apply Adhesive to Stair Tread

5. Step 5: Position and Press Carpet Treads

   • 0:04–0:06 Install Carpet Treads
   • 0:21–0:26 Press Down Firmly
   • 0:06–0:14 Install Carpet Treads

6. Step 6: Secure Edges (Optional)

   • 0:02–0:06 Apply Anti-Slip Strip (this video)
   • 7:23–7:44 Secure Step Treads with Adhesive