Lightly Sand and Clean Primed Surface

What happens in this clip

After the primer has fully dried (4-6 hours), lightly sand the primed surface using P180 sandpaper or a sanding sponge. This step creates a smoother base for the final paint coats. Once sanded, use the dusting brush to brush away any dust particles generated during sanding, ensuring a perfectly clean surface for the topcoat application.

Goal: Smooth the primed surface and remove dust

What's used

Tools

• Dusting brush
• Sanding sponge

About the full video

This project provides a step-by-step guide on how to paint stair risers to refresh the look of your staircase. It covers preparation, masking, priming, and applying two coats of paint, ensuring a smooth and durable finish.

Step 4 of 6: Sand Between Coats (Optional)

Once the primer is completely dry, lightly sand the risers with very fine-grit sandpaper (220 grit or higher). This will knock down any subtle imperfections or raised grain. Wipe away all dust with a tack cloth.

Open this step in the guide

Other videos for this step

• Sand and Clean (Post-Primer)
• Lightly Sand Primed Surface and Remove Dust