Install Vertical Battens
From Board and Batten Wainscoting Installation · Step 3 of 6 · Video by Colton Crump DIY
Showing 3:24–4:31 of the source video. Watch the full video with every moment.
What happens in this clip
Return to your focal wall and begin installing the vertical battens. Start by placing two vertical pieces in the corners of the wall. Measure each vertical board individually to ensure a precise fit between the floor and the horizontal trim piece. Cut the boards to the exact required length. Apply construction adhesive to the back of each vertical piece. Position the board, ensuring it is plumb (perfectly vertical) with a level, and then secure it with a nail gun. Maintain the consistent spacing (e.g., 19 inches) that was planned earlier for all subsequent vertical battens. When moving to an adjacent wall, if the corner already aligns with your spacing, you might not need to add another corner piece; simply continue the chosen spacing. This meticulous approach helps create a clean and symmetrical appearance.
Goal: Secure all vertical battens with consistent spacing
What's used
Tools
- Caulk Gun
- Circular Saw
- Hand saw
- Level Husky
- Laser level
- Measuring Tape
- Nail Gun
- Pencil
Materials
- Construction Adhesive Liquid Nails
- Trim Pieces
- Pine boards
About the full video
This project demonstrates how to create the popular 'board and batten' look on interior walls using trim pieces, rather than installing full boards. The process involves preparing the space by removing fixtures and patching holes, meticulously planning and installing horizontal and vertical trim pieces, filling and sanding imperfections, and finally painting the finished wall for a cohesive and stylish result.
Step 3 of 6: Cut and Install Battens
Determine the desired spacing for your battens. A common spacing is 16 inches on center, but this can vary. Measure the distance between the end of the wall (or corner) and the top board. Calculate the number of battens needed and the spacing between them. Cut your batten material (e.g., 1x3 pine or 1x4 pine) to the length required to go from the top board to the baseboard (or the marked height line). Use a level to ensure each batten is perfectly plumb (vertical). Attach the battens to the wall studs using finishing nails or screws. Ensure they are flush with the top board and meet the baseboard squarely.
Every video in Board and Batten Wainscoting Installation
Step 1: Measure and Mark Wainscoting Height
- 0:23–0:53 Establish Level Line for Chair Rail
- 0:51–1:34 Mark Chair Rail Height
- 0:32–2:11 Map Out Wainscoting Layout
Step 2: Install the Top Board (or Cap Rail)
- 0:26–0:35 Cut and Install Top Plate
- 2:25–2:34 Install Horizontal Board
- 3:46–5:39 Cut and Attach Top Piece
Step 3: Cut and Install Battens
- 3:24–4:31 Install Vertical Battens (this video)
- 1:41–2:11 Install Vertical Battens
- 5:55–6:53 Cut and Install Vertical Battens
Step 4: Install Baseboard (if applicable)
- 0:05–0:13 Install Board and Batten Trim
- 4:09–5:25 Install Vertical Battens with Spacer Blocks
Step 5: Fill Nail Holes and Caulk Gaps
- 15:25 Finish Joints and Nail Holes
- 0:11–0:13 Caulk, Fill, and Sand
- 5:31–7:18 Fill Nail Holes and Caulk Seams
Step 6: Prime and Paint
- 4:10–4:47 Paint Paneling (Primer)
- 0:13–0:15 Prime and Paint Wainscoting
- 4:38–5:25 Prime and Paint Shiplap
Questions about Board and Batten Wainscoting Installation
How do I accurately measure and cut battens to match the angle of my staircase?
To accurately match staircase angles, use a digital angle finder or a protractor to measure the slope of the stairs directly from the wall or a scrap piece of wood. Transfer this angle to your miter saw, making test cuts on scrap material first. Ensure your battens run parallel to the stair stringer for a cohesive look.
What are the most critical safety precautions to take when installing wainscoting on a staircase?
Working on a staircase requires extra caution to prevent falls. Use a stable, securely placed ladder or scaffolding, and never overreach. Always wear safety glasses when cutting wood, and ear protection when using power tools like the miter saw and nail gun.
Given the 'intermediate' difficulty and '3-day' estimate, what typically takes the most time in this project?
The most time-consuming aspects are typically accurate measuring, cutting all the battens to precise angles, and ensuring everything is level and plumb on an angled staircase wall. Filling nail holes, caulking gaps, and the priming/painting steps also require significant time for a professional finish.
Why is a stud finder important for this project, and how should I use it effectively?
A stud finder is crucial for locating wall studs, allowing you to securely nail or screw your wainscoting components directly into the framing. Attaching to studs prevents the wainscoting from pulling away from the wall over time and provides a much stronger installation. Mark all stud locations lightly with your marking pencil before beginning installation.
Can I use construction adhesive in addition to fasteners for a stronger hold on the battens?
Yes, using a high-quality construction adhesive on the back of your battens and boards can significantly enhance the bond to the wall, especially if stud placement is sparse or uneven. Apply a thin bead of adhesive before nailing to create a more durable and long-lasting installation.
What should I do if my walls aren't perfectly straight or plumb, which is common in older homes?
If walls aren't perfectly straight, use shims behind the battens where necessary to bring them plumb and level. Small gaps can be filled effectively with painter's caulk before priming and painting. For larger irregularities, consider using thicker battens that can absorb minor wall imperfections.
Board and Batten Wainscoting Installation
This project outlines the steps for installing board and batten wainscoting on a staircase wall. It includes measuring, cutting materials, attaching the boards, and applying battens. The process will enhance the aesthetic appeal of the wall and provide a durable finish.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.
Subscribe for exclusive updates
Be the first to know about promotions, new products, and sales.