Install the Stair Treads

What happens in this clip

Starting from the bottom step of the staircase, carefully align the first prepared stair tread onto the wooden step. Ensure the tread is centered, positioned straight, and covers the desired area of the step. Once satisfied with the placement, firmly press the tread down across its entire surface, paying close attention to the edges and corners, to securely bond the adhesive to the wood. The installer in the video kneels and crawls up the stairs, applying significant body weight to ensure good contact. Repeat this alignment and pressing process for all remaining stairs, working your way up the staircase one tread at a time.

Goal: Securely attach carpet treads to all stairs

What's used

Materials

• Carpet Stair Treads (with pre-applied adhesive)
• Non-slip rubber or vinyl stair mats
• reduce noise
• and prevent slips.

About the full video

This project guides you through the simple process of installing pre-adhesive carpet stair treads to an existing wooden staircase. It involves thoroughly cleaning the stairs, peeling the protective backing from each tread, and then carefully positioning and firmly pressing the treads onto the steps. This DIY project transforms a bare wooden staircase into a more comfortable, quieter, and slip-resistant surface with an improved aesthetic.

Step 6 of 6: Install Protective Treads

Carefully align each prepared tread with its stair. Press down firmly, especially around the edges and any points where the securing mechanism is applied, to ensure a solid bond and a flat, stable surface. Work from the back of the tread forward, ensuring no buckling or lifting occurs. Once all treads are in place, walk on them gently to confirm they are secure.

Open this step in the guide

Every video in How to Protect Hardwood Stairs from Wear with Removable Treads

1. Step 1: Measure Stair Treads

   • 0:57–1:16 Measure Treads and Mark Laminate
   • 0:43–0:52 Measure and Cut New Treads
   • 0:41–1:06 Measure and Mark Treads

2. Step 2: Cut Tread Material

   • 0:19–0:22 Measure and Cut FastTread
   • 4:34–5:55 Measure and Cut Treads
   • 0:55–1:05 Measure and Cut First Tread

3. Step 3: Prepare Tread Edges (Optional)

   • 7:51–8:14 Round Over Edges and Sand Treads
   • 5:16–7:59 Round Over Tread Edges
   • 0:08–1:13 Prepare and Finish Wood Stair Treads

4. Step 4: Test Fit Treads

   • 2:13–2:35 Test Fit and Adjust Treads
   • 1:35–1:41 Dry Fit Tread and Nosing
   • 1:38–1:50 Dry-Fit Laminate Pieces to Each Tread

5. Step 5: Install Securing Mechanism

   • 3:25–4:32 Secure Treads to Stairs
   • 4:32–5:29 Finalize Tread Placement
   • 0:49–2:35 Install the Tread and Nosing Components

6. Step 6: Install Protective Treads

   • 0:20–0:37 Apply Stair Treads
   • 0:10–0:16 Install the Stair Treads (this video)
   • 0:59–2:07 Install First Stair Tread