Install First Stair Tread

What happens in this clip

Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn't perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.

Goal: Securely attach the first carpet stair tread

What's used

Tools

• Oak Valley Designs Bullnose Carpet Stair Tread Oak Valley Designs

About the full video

This project demonstrates the straightforward installation of Oak Valley Designs' Bullnose Carpet Stair Treads and a matching Landing Pad. The video highlights the product's features, including a reinforced front edge, built-in padding, and pressure-sensitive adhesive, which allows for easy, repositionable, and non-damaging application to wooden stairs, enhancing safety and aesthetics.

Step 6 of 6: Install Protective Treads

Carefully align each prepared tread with its stair. Press down firmly, especially around the edges and any points where the securing mechanism is applied, to ensure a solid bond and a flat, stable surface. Work from the back of the tread forward, ensuring no buckling or lifting occurs. Once all treads are in place, walk on them gently to confirm they are secure.

Open this step in the guide

Every video in How to Protect Hardwood Stairs from Wear with Removable Treads

1. Step 1: Measure Stair Treads

   • 0:57–1:16 Measure Treads and Mark Laminate
   • 0:43–0:52 Measure and Cut New Treads
   • 0:41–1:06 Measure and Mark Treads

2. Step 2: Cut Tread Material

   • 0:19–0:22 Measure and Cut FastTread
   • 4:34–5:55 Measure and Cut Treads
   • 0:55–1:05 Measure and Cut First Tread

3. Step 3: Prepare Tread Edges (Optional)

   • 7:51–8:14 Round Over Edges and Sand Treads
   • 5:16–7:59 Round Over Tread Edges
   • 0:08–1:13 Prepare and Finish Wood Stair Treads

4. Step 4: Test Fit Treads

   • 2:13–2:35 Test Fit and Adjust Treads
   • 1:35–1:41 Dry Fit Tread and Nosing
   • 1:38–1:50 Dry-Fit Laminate Pieces to Each Tread

5. Step 5: Install Securing Mechanism

   • 3:25–4:32 Secure Treads to Stairs
   • 4:32–5:29 Finalize Tread Placement
   • 0:49–2:35 Install the Tread and Nosing Components

6. Step 6: Install Protective Treads

   • 0:20–0:37 Apply Stair Treads
   • 0:10–0:16 Install the Stair Treads
   • 0:59–2:07 Install First Stair Tread (this video)