Dry Fit Tread and Nosing

What happens in this clip

Once the stair tread and nosing pieces are cut, bring them back to the stairs for a dry fit. Place them into their final positions without adhesive to ensure all cuts are perfect and the pieces fit snugly against the riser and along the stair's edges. Make any necessary micro-adjustments at this stage.

Goal: Verify the perfect fit of the stair tread and nosing before permanent installation.

What's used

Tools

• Engineered Hardwood Flooring Florette Silverline (Anzo color)
• Stair Nosing Florette (Anzo color)

About the full video

This DIY project provides a step-by-step guide to installing engineered hardwood flooring and matching stair nosing on existing stairs. The process involves precise measurement and cutting of flooring pieces, removal of unnecessary grooves, dry fitting for accuracy, and finally, gluing down the risers, treads, and nosing, securing them with brad nails and finishing with a wax crayon.

Step 4 of 6: Test Fit Treads

Before permanent installation, carefully place each cut tread onto its intended stair. Check that it sits flush and covers the desired area without any gaps or overlaps. Make minor adjustments by trimming small amounts if necessary. This step is critical to ensure the treads will lay flat and securely.

Open this step in the guide

Every video in How to Protect Hardwood Stairs from Wear with Removable Treads

1. Step 1: Measure Stair Treads

   • 0:57–1:16 Measure Treads and Mark Laminate
   • 0:43–0:52 Measure and Cut New Treads
   • 0:41–1:06 Measure and Mark Treads

2. Step 2: Cut Tread Material

   • 0:19–0:22 Measure and Cut FastTread
   • 4:34–5:55 Measure and Cut Treads
   • 0:55–1:05 Measure and Cut First Tread

3. Step 3: Prepare Tread Edges (Optional)

   • 7:51–8:14 Round Over Edges and Sand Treads
   • 5:16–7:59 Round Over Tread Edges
   • 0:08–1:13 Prepare and Finish Wood Stair Treads

4. Step 4: Test Fit Treads

   • 2:13–2:35 Test Fit and Adjust Treads
   • 1:35–1:41 Dry Fit Tread and Nosing (this video)
   • 1:38–1:50 Dry-Fit Laminate Pieces to Each Tread

5. Step 5: Install Securing Mechanism

   • 3:25–4:32 Secure Treads to Stairs
   • 4:32–5:29 Finalize Tread Placement
   • 0:49–2:35 Install the Tread and Nosing Components

6. Step 6: Install Protective Treads

   • 0:20–0:37 Apply Stair Treads
   • 0:10–0:16 Install the Stair Treads
   • 0:59–2:07 Install First Stair Tread