Clean Porch and Steps

What happens in this clip

Before applying resurfacer to the porch and steps, the surfaces are thoroughly cleaned. One worker uses a large scrubbing brush and a bucket containing a cleaning solution to vigorously clean the concrete, removing dirt and grime. Another worker assists by spraying the steps with what appears to be a cleaner, possibly from a garden sprayer, to ensure the surface is pristine for adhesion. Both workers wear blue shoe covers to prevent tracking new dirt onto the cleaned areas.

Goal: Throughly clean the porch and step surfaces to ensure proper adhesion for the resurfacer

What's used

Tools

• Blue shoe covers
• Old shoes dedicated to dirty work
• Large scrubbing brush
• Stiff bristle brush
• Sprayer Husqvarna
• Pressure washer (low setting)

Materials

• Bucket Lowe's (implied)
• Utility bucket
• Cleaning solution
• Degreaser
• Mild detergent
• Water

About the full video

This project demonstrates the transformation of existing worn concrete surfaces, including a pathway and porch steps, through the application of a concrete resurfacing product. The process involves thorough cleaning and preparation of the old concrete, mixing and applying the new resurfacing material to achieve a smooth finish on the pathway and a textured design on the porch and steps, and finally, sealing the entire area with a protective and coloring agent for a refreshed and durable look.

Step 1 of 6: Clean the Steps

Sweep or blow away loose debris. Use a stiff brush and a cleaning solution (e.g., TSP substitute or a strong detergent mixed with water) to scrub away any embedded dirt, oil, or mildew. Rinse the steps thoroughly with a hose and allow them to dry completely. For stubborn stains or mildew, a pressure washer can be used on a low setting, being careful not to damage the wood or concrete.

Open this step in the guide

Other videos for this step

• Rinse and Dry Stairs
• Clean Outdoor Wooden Surfaces