Apply First Coat of Non-Slip Paint

What happens in this clip

Begin applying the first coat of the prepared non-slip paint. Start with a paint brush to carefully paint the edges, corners, and any detailed areas of the steps, as seen in the video from 0:01-0:07. Once the detailed areas are covered, switch to a paint roller with an appropriate nap for masonry surfaces to efficiently cover the broader, flat surfaces of the step treads and risers, as demonstrated from 0:07-0:09. Ensure an even coat and avoid applying too thickly, which can lead to bubbling or peeling.

Goal: Apply an even first coat to all surfaces of the porch steps.

What's used

Tools

• Paint Brush Purdy
• Sherwin-Williams
• corners
• and detailed areas. Visible from 0:01-0:07.
• Paint Roller Wooster
• Graco
• flat surfaces of the steps. Visible from 0:07-0:09.
• Paint Tray
• Roller Cover
• Purdy WhiteDove Roller Cover

Materials

• Prepared Non-Slip Paint

About the full video

This project provides step-by-step instructions for painting a masonry porch surface, specifically focusing on how to prepare the surface, apply paint, and incorporate a non-slip additive to enhance safety and durability for outdoor, high-traffic conditions. The process involves cleaning, masking, carefully mixing the paint with an additive, and applying multiple coats for a lasting finish.

Step 4 of 6: Apply Anti-Slip Paint

Stir the anti-slip porch paint thoroughly before and during application. Using a brush for edges and a roller for the main surfaces, apply a thin, even coat of paint. Work in manageable sections, ensuring to maintain a wet edge to avoid lap marks. Pay attention to the texture of the paint, which typically contains aggregate for grip. Allow the first coat to dry completely according to the paint manufacturer's recommendations, which is usually several hours but can be longer depending on temperature and humidity.

Open this step in the guide

Other videos for this step

• Apply Anti-Skid Paint
• Apply First Coat of Patio Paint