Winder Stairs Code Compliance, Walk Lines, And Fixing Narrow Steps - Home Remodeling Tips
Video by stairbuilding · 1 moment used in Oak Valley Designs's DIY guides · 9:03 long

Moments in this video
- 6:31–8:31 Layout Code-Compliant Winder Treads with Concentric Circles
From How to Lay Out Winder Stairs, Step 5: Determine Winder Tread Layout
The video then illustrates a method for laying out winder treads using concentric circles and a framing square to achieve code-compliant uniform tread depths. It suggests drawing concentric circles from the inner corner of the winder. For a 90-degree corner, the lines radiating from the center of these circles to define the treads would be at angles (e.g., 45 degrees, 22.5 degrees). By ensuring the walk line (12 inches from the inside edge) follows a concentric curve, all treads measured along this path will have equal depth. This approach allows for creative and compliant winder designs.
The guide that use this video
More from the Oak Valley Designs DIY Hub
Read the guide Browse all guides
Planning this project? Shop Oak Valley Designs.

