Wall Mounted Handrail
Video by ArtisanTony · 1 moment used in Oak Valley Designs's DIY guides · 5:27 long

Moments in this video
- 4:26–5:07 Gluing and Fastening the Return Piece
From How to Install a Handrail Return at the End of a Rail, Step 4: Secure Handrail Return to Handrail
After pre-drilling, apply wood glue to the mating surface of the handrail return piece. Align the pre-drilled return piece with the main handrail, ensuring the slight overhang as previously described. Then, use a cordless impact driver to secure the return piece with a screw. As the screw tightens, the return piece will slide into a perfectly flush position, eliminating the overhang. Immediately wipe away any excess glue that squeezes out to prevent it from drying and creating a messy surface that is difficult to sand or stain later. Finally, ensure the screw head is countersunk so it sits flush or slightly below the surface, ready for wood filler and finishing.
The guide that use this video
More from the Oak Valley Designs DIY Hub
Read the guide Browse all guides
Planning this project? Shop Oak Valley Designs.

