The Ultimate Guide to Caulking Gaps
Video by Refresh Home Improvements · 1 moment used in Oak Valley Designs's DIY guides · 4:56 long

Moments in this video
- 3:29–4:04 Remove Painter's Tape
From How to Caulk Gaps Along Stair Skirt Boards, Step 6: Remove Painter's Tape
Once the caulk is smoothed, but while it is still wet and has not yet formed a skin, carefully and slowly peel off the painter's tape. Pull the tape at an angle, away from the fresh caulk line, to ensure a crisp, clean edge. Removing the tape before the caulk cures prevents it from pulling away or damaging the finished caulk bead.
The guide that use this video
Transcript
0:00 I better fix that. Have fun with it. I'm going to smooth that cocking out of there. We're back on site here and we've got a really interesting problem that we're met with a lot. And there's actually a really simple solution to it. When you have two dissimilar materials coming together at different planes, oftentimes you get a little bit of a crack or a little bit of imperfections where the two meet. You can see where this drywall meets this oak cap that we put on.
0:46 There's a bit of a gap and of course this raw drywall edge is going to have some imperfections. So I want to show you an easy way to deal with that and make sure that it stays crack proof forever. So now we know the problem. Let's start talking about the solution. I know a lot of you have probably tried just filling that with drywall compound and we'll look amazing at first if you just fill up that void. But what's going to happen over time is these two materials are going to move at different rates and that's going to cause cracking. That could happen the next day, it could happen the next year. You never know. The easiest solution is to use some caulking and a company like DAP has a lot of different paintable caulking. You can use this Alex flex. You can use their extreme stretch, but all of them are paintable and they're also flexible. So what's going to happen is I'm going to fill up this void carefully and then we left
1:32 with a nice sealed gap that will be able to accommodate those two moving materials at different rates. So let me show you exactly how to do it. So with the caulking, I know I'm going to be able to smooth it out to where it meets the drywall. But I want to be a little extra careful of how it looks on the bottom of this oak. I know you're probably not going to see it. No one's going to be on the ground looking up at it, but I really want to make sure I leave a nice clean edge of where that white caulking or the paint in the end where that gets left on the bottom of this oak. So for that reason, I'm going to use some tape and the first step I'm going to do is I'm going to tape off the side that I'm worried about. So I'm just going to leave a little bit of a gap, but not too much that I have too much of a buildup with the caulking. So the thing to keep in mind is just you want to make sure if you do have rough raw
2:17 drywall that you've cut out, any of those little pieces of debris or that paper that's hanging down, you want to make this as flush or as recessed without cutting too much out so that there's room for the caulking to go in and there's no protrusions that will make it look wavy and ugly. So now that it's all taped up and all ready, I'm going to go ahead and I'm going to lay a bead of caulking in that seam. Just make sure you have a wet rag that stuffs water soluble. So as I put it on, I'll use a damp finger and I'll be able to smooth it right out. So not too much caulking. I'm going to smooth that caulking out of there and if you need to stop, get rid of some
3:06 and your finger off. Keep it clean. Have fun with it. I'm going to go the other way now. It'll be pretty cool because I'll come back and see on the other side. Then you can just start to shape it a little bit. I found it. Live a little. It's rag-scaling dirty. It's okay. Have fun with that. I want to take this tape off pretty quickly. We don't want it to generate a skin and then what can happen is you pull the tape off and kind of peel and weird ways. So now that it's still wet, I'm going to start peeling the tape off.
3:57 And as you can see, it's absolutely perfect. What we've put in there, if you put a flexible sealant like this one from DAP, it's going to be paintable in a couple hours. We're going to leave it for 24 hours, make sure it's good and dry, especially in some of the thicker spots. But once you paint that, you have a nice clean line to paint too. And now if someone does look underneath here, it's going to look super, super clean. So not only will it not crack, it's going to look like a million bucks. And it only took me about five minutes and five bucks and gawking. You really got to try this. It's not hard. You can do it. Have fun with it. Alright, so, it's me.
4:42 And we are here and we've got a little conundrum that we want to let you in on a tip. Or if. Let's spin that back.
Automatically transcribed from the source video.
More from the Oak Valley Designs DIY Hub
Read the guide Browse all guides
Planning this project? Shop Oak Valley Designs.

