powered by

Stencil Furniture Flip ♻️🎨

Video by Cricut · 1 moment used in Oak Valley Designs's DIY guides · 0:58 long

Moments in this video

  1. 0:06–0:07 Repairing Surface Imperfections From How to Remove Carpet Stair Treads Without Damaging the Finish, Step 7: Repair Wood Damage

    After sanding, carefully inspect all exposed wood surfaces for any remaining imperfections such as scratches, small holes (e.g., from old hardware), dents, or gouges. Select a wood filler that is compatible with your intended finish (stainable if you plan to stain). Using a putty knife or your finger, apply the wood filler to the damaged areas, ensuring it is pressed firmly into the void. Overfill slightly, as wood filler tends to shrink as it dries. Allow the wood filler to dry completely according to the manufacturer's instructions. Once dry, lightly sand the filled areas flush with the surrounding wood using a fine-grit sandpaper (e.g., 220 grit) to create a seamless, smooth surface. (Although not explicitly shown, sanding after drying is crucial for a smooth finish).

The guide that use this video

More from the Oak Valley Designs DIY Hub

Read the guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Stencil Furniture Flip ♻️🎨 — step-by-step moments | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.