Stencil Furniture Flip ♻️🎨
Video by Cricut · 1 moment used in Oak Valley Designs's DIY guides · 0:58 long

Moments in this video
- 0:06–0:07 Repairing Surface Imperfections
From How to Remove Carpet Stair Treads Without Damaging the Finish, Step 7: Repair Wood Damage
After sanding, carefully inspect all exposed wood surfaces for any remaining imperfections such as scratches, small holes (e.g., from old hardware), dents, or gouges. Select a wood filler that is compatible with your intended finish (stainable if you plan to stain). Using a putty knife or your finger, apply the wood filler to the damaged areas, ensuring it is pressed firmly into the void. Overfill slightly, as wood filler tends to shrink as it dries. Allow the wood filler to dry completely according to the manufacturer's instructions. Once dry, lightly sand the filled areas flush with the surrounding wood using a fine-grit sandpaper (e.g., 220 grit) to create a seamless, smooth surface. (Although not explicitly shown, sanding after drying is crucial for a smooth finish).
The guide that use this video
More from the Oak Valley Designs DIY Hub
Read the guide Browse all guides
Planning this project? Shop Oak Valley Designs.

