Peak Aluminium Balustrade Stair Installation
Video by Peak Products Videos · 1 moment used in Oak Valley Designs's DIY guides · 5:43 long
Moments in this video
- 0:34–0:52 Determine Post Positions
From Cable Railing Installation, Step 1: Layout Post Locations
Begin by determining the precise placement of all posts for the stair balustrade. Use a measuring tape to ensure that the posts are equally spaced along the stair run. A critical requirement is that the space between any two posts must not exceed 1.8 meters (approximately 5 feet 11 inches). Additionally, ensure that the chosen post locations are perfectly aligned with where the stair balustrade will be installed. The measurement for spacing should be taken from the center of the first post to the center of the last post to ensure overall accuracy.
The guide that use this video
More from the Oak Valley Designs DIY Hub
Read the guide Browse all guides
Planning this project? Shop Oak Valley Designs.
Subscribe for exclusive updates
Be the first to know about promotions, new products, and sales.