powered by

How to Replace a Light Fixture

Video by Family Handyman · 1 moment used in Oak Valley Designs's DIY guides · 1:53 long

Moments in this video

  1. 0:10–0:28 Remove The Old Fixture From How to Replace a Light Fixture over a Two-Story Stairwell, Step 2: Remove the Old Light Fixture

    Begin by removing any decorative glass shades or covers from the old fixture to prevent accidental breakage. Unscrew the light bulbs. Use a screwdriver to detach the fixture's base or canopy from the ceiling electrical box. Once loose, carefully lower the fixture to expose the electrical wiring. Before touching any wires, use a non-contact voltage tester to confirm that the power is indeed off at the wires inside the electrical box. Disconnect the wires by untwisting the wire nuts: usually black (hot), white (neutral), and a bare copper or green wire (ground). Finally, remove the old mounting bracket from the electrical box. Inspect the ceiling area; if the old fixture left unpainted patches or damaged plaster, you may need to do some touch-up painting before installing the new fixture.

The guide that use this video

More from the Oak Valley Designs DIY Hub

Read the guide Browse all guides

Planning this project? Shop Oak Valley Designs.

How to Replace a Light Fixture — step-by-step moments | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.