powered by

How To Measure And Cut Stair Stringers

Video by HAUS PLANS ®️ · 3 moments used in Oak Valley Designs's DIY guides · 1:00 long

Moments in this video

  1. 0:01–0:11 Measure Total Rise From How to Measure Stairs That Are Different Widths, Step 8: Document All Measurements

    The video opens with the creator providing context for the project: building stairs for a newly framed warehouse to access a storage space above an office. The first critical step is to accurately measure the total vertical distance from the finished floor to the top of the platform where the stairs will land. Using a tape measure, the creator measures this distance to be 107 and 3/8 inches. This measurement is crucial for calculating the rise and run of each step.

  2. 0:42–0:53 Cut the Stringers From How to Lay Out Winder Stairs, Step 7: Cut Stringers

    With the stringer marked, it's time to cut out the steps. Use a circular saw to make the straight cuts along the marked lines for the rise and run. It's crucial to be careful not to 'overcut' past the inside corner of each step, as this can weaken the stringer. For the interior corners where the circular saw cannot reach completely, finish these cuts using a reciprocating saw. Once the first stringer is cut, use it as a template to trace and cut the remaining stringers, ensuring all are identical.

  3. 0:42–0:53 Cut the Stringers From How to Lay Out a Stair Stringer with a Framing Square, Step 6: Cut the Stair Stringer

    With the stringer marked, it's time to cut out the steps. Use a circular saw to make the straight cuts along the marked lines for the rise and run. It's crucial to be careful not to 'overcut' past the inside corner of each step, as this can weaken the stringer. For the interior corners where the circular saw cannot reach completely, finish these cuts using a reciprocating saw. Once the first stringer is cut, use it as a template to trace and cut the remaining stringers, ensuring all are identical.

Guides that use this video

Transcript

0:02 hya we just finished framing this warehouse and now I need to build a set of stairs up to the storage space above the office the distance from the floor to the top of the platform is 107 and 38 in for commercial stairs the 7-Eleven rule applies no more than a 7in rise and no less than an 11in run 107 and 38 divided by 16 risers gives me a riser height of 6 and 11/16 here I set the inside of my square to 6 and 11/16 and 11 to Mark out the rise and run I like to use these stair guides once they're tightened down they hold the square in place so you don't have to check the measurements each time after I cut out the first Stringer I use it as a pattern to trace the others this way they're all exactly the same next I use my circular saw to cut everything out I'm careful not to overcut so I don't weaken the Stringer it's fun to knock these out

0:48 with a karate chop but it's better to finish the cuts with a reciprocating saw I make sure this Stringer fits perfect before I cut the others be sure to like And subscribe so you don't miss the rest of the stair project

Automatically transcribed from the source video.

More from the Oak Valley Designs DIY Hub

Read the guide Browse all guides

Planning this project? Shop Oak Valley Designs.

How To Measure And Cut Stair Stringers — step-by-step moments | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.