How To Make A Photo Ledge - Bunnings Warehouse
Video by Bunnings Warehouse · 1 moment used in Oak Valley Designs's DIY guides · 1:06 long

Moments in this video
- 0:29–0:38 Scan for Wall Studs
From How to Hang Heavy Pictures on Drywall in a Stairwell, Step 1: Locate Wall Studs
Take your stud finder and place it flat against the wall, typically over one of your pencil marks. Activate the stud finder (usually by pressing and holding a button) and slowly slide it horizontally across the wall. Pay attention to the indicators (lights and/or sounds) on the stud finder. When it detects a wall stud, it will typically light up or emit a distinct sound. Mark the edges and center of any studs found. If a stud is present at your marked screw location, you can drill directly into it for the strongest hold. If no studs are found at the desired mounting points, you will need to use drywall anchors.
The guide that use this video
Transcript
0:00 I'm Chelsea and I'm going to show you how to install a photo shelf. It's a really good option to use if you don't want to have something permanent. If you've got photos of your ex-boyfriend up on the shelf, just remove them and replace them with the new. You will need a drill, a level, a stud finder, a pencil. What we need to do first is mark the wall the way the screws are going to go. We need to use our level to make sure it's straight because we don't want a wonky shelf. If the bubble is in the middle, that means we're straight and we're good to go. ♪ [music] ♪ If you find studs in the wall, drill straight into that. If not, use a wall mate. So we need to drill the wall mate in flush to the wall. ♪ [music] ♪
0:47 These screws will act as your hook, so have them hanging out just a little bit. Final step is to attach your shelf. And there you have it. Done. Time to style. ♪ [music] ♪
Automatically transcribed from the source video.
More from the Oak Valley Designs DIY Hub
Read the guide Browse all guides
Planning this project? Shop Oak Valley Designs.

