How To Convert Carpeted Stairs to Hardwood | Beyond The Basics
Video by Lowe's Home Improvement · 1 moment used in Oak Valley Designs's DIY guides · 2:38 long

Moments in this video
- 0:13–0:38 Remove Carpet and Prep for Installation
From How to Get a Hardwood Look on Carpeted Stairs, Step 2: Remove Staples and Nails
Begin by removing all existing carpet from the stairs. Use a utility knife to cut the carpet into manageable strips and a pry bar to lift it from the subfloor. Exercise caution when cutting, especially if you suspect there might be existing hardwood underneath, to avoid damage. After the carpet is removed, pull off any underlying carpet pads. Next, meticulously inspect the entire stair structure for any fasteners, such as staples, nails, or tack strips (also known as carpet grippers), and remove them completely using a pry bar or hammer. Tack strips have sharp nails and are designed to hold carpet, but are dangerous to step on and must be removed.
The guide that use this video
More from the Oak Valley Designs DIY Hub
Read the guide Browse all guides
Planning this project? Shop Oak Valley Designs.

