Full stainless steel cable railing install #deckbuilding #railingdesign
Video by drdecks · 2 moments used in Oak Valley Designs's DIY guides · 0:43 long

Moments in this video
- 0:06–0:26 Thread and Cut Cables
From How to Tension and Adjust Stair Cable Railing, Step 1: Initial Cable Engagement
After the main railing framework is in place, workers proceed to thread multiple horizontal runs of thin stainless steel cable through pre-drilled holes in the railing posts. This step requires careful handling to prevent kinking or damaging the cables. Once threaded through all intermediate posts, the cables are cut to the appropriate length, leaving enough excess for attaching the end fittings.
- 0:26–0:41 Secure and Tension Cables
From How to Tension and Adjust Stair Cable Railing, Step 2: Attach Tensioning Fitting to First Cable End
After the cables are threaded and cut, specialized cable fittings, such as tensioners or terminal studs, are attached to the ends of each cable run. Workers are shown using a crimping or swaging tool to securely fasten these fittings onto the cable ends. Once the fittings are attached, wrenches (either adjustable or open-end) are used to carefully tension each cable. This process ensures all cables are taut, providing a safe and aesthetically pleasing railing system with uniform tension.
The guide that use this video
More from the Oak Valley Designs DIY Hub
Read the guide Browse all guides
Planning this project? Shop Oak Valley Designs.

