powered by

DIY Concrete Overlay!

Video by Deco-Crete TV · 1 moment used in Oak Valley Designs's DIY guides · 11:07 long

Moments in this video

  1. 4:24–5:41 Prime the Concrete Surface From How to Resurface Worn Concrete Steps, Step 3: Prime the Surface

    After the patched areas are completely dry (indicated by a lighter color), it's time to prime the entire concrete surface. First, tape off any adjacent surfaces (like walls or siding) with an orange waterproof tape to protect them. Prepare the Sure Bond 100 primer by mixing it 1:1 with water in a pump-up sprayer (e.g., Chapin 2000). Apply the diluted primer evenly over the entire concrete slab, ensuring thorough saturation. Immediately follow with a roller to mop up any puddles and ensure even distribution, preventing pooling. The goal is to achieve a 'Saturated Surface Dry' (SSD) condition, where the surface is fully saturated but no standing water is visible. For edges and corners, apply the primer with a paintbrush to ensure complete coverage. On very hot days, lightly misting the surface with water before priming can help reactivate the primer if it dries too quickly.

The guide that use this video

More from the Oak Valley Designs DIY Hub

Read the guide Browse all guides

Planning this project? Shop Oak Valley Designs.

DIY Concrete Overlay! — step-by-step moments | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.