powered by

Dad’s Summer School | Teaching My Kid How to build and Youtube: Episode 1

Video by Perkins Builder Brothers · 1 moment used in Oak Valley Designs's DIY guides · 3:42 long

Moments in this video

  1. 1:56–2:34 Install Mounting Brackets From How to Install a Retractable Baby Gate on Stairs, Step 4: Mount the Brackets

    Align the pre-drilled holes with the holes in the mounting bracket. Use an impact driver or power drill to drive the screws through the bracket and into the wall, securing it firmly. If using drywall anchors, insert them first according to their specific instructions, then attach the bracket. Ensure the bracket is flush against the wall and doesn't wiggle. Be careful not to overtighten the screws, especially when working with drywall, as this can cause 'drywall pops' where the screw head breaks through the surface or pulls the anchor out.

The guide that use this video

Transcript

0:07 so today we're installing towel bars and toilet paper holders and stuff like that we're gonna have my son chase who's 11 years old demonstrate how to install a towel bar the correct way without causing yourself all kinds of other problems when you're done first you find a place in the wall that has enough room open the package and don't cut yourself you might notice that I ran the knife right over there and right now I just showing you what not to do yeah next we need to check the template to see the spacing for the bracket according to the template the spacing is 24 inches right now we're finding the center point of this window so it is so the bracket will be centered up with the window frame

0:55 this measures 35 and a quarter and half of that is 17 and 5/8 very good now we're gonna mark 12 inches either side of our Center mark next use a stud finder to find solid wood to mount your brackets on if there are no studs to mount your brackets on you can use drywall anchors now we're going to use a four-foot level to see if our marks are level they're not discuss the walls with the level so you don't have to paint them later now

1:48 we're going to pre-drill this hole and make sure you don't drop your drill on this finished tile so you don't crack it [Music] make sure you do apply a lot of pressure so you don't strip the screw head like I just did [Music] now I hold the bracket level and fasten it tight be careful not to over-tighten

2:36 because you can cause drywall pops now we're going to attach the brackets in the bar [Music] oh yeah nailed it they've got any problem with this and give him your phone number dude yeah okay let's try this thing out

Automatically transcribed from the source video.

More from the Oak Valley Designs DIY Hub

Read the guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Dad’s Summer School | Teaching My Kid How to build and Youtube: Episode 1 — step-by-step moments | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.