Secure the First Tread

What happens in this clip

Once the first tread is accurately positioned, secure it in place. If the treads are self-adhesive, carefully peel off the backing and firmly press the tread onto the stair, ensuring good contact across its entire surface. If not self-adhesive, apply double-sided carpet tape to the back of the tread before pressing it down. Ensure the tread is smooth and free of wrinkles.

Goal: Firmly attach the first stair tread to the stair

What's used

Materials

• Double-sided Carpet Tape
• Staple gun and staples (for more permanent installation)
• Stair Tread (Self-adhesive)

Pro tips for this step

• Oak Valley Designs Pro Tip: Press firmly and evenly across the whole tread to make sure the adhesive sticks securely for lasting safety.

These safety tips are AI-generated and have not been verified by a professional. They may be incomplete or incorrect. Verify independently against manufacturer instructions and local codes, and consult a qualified professional before relying on them. This is not a substitute for professional advice.

Shop this step at Oak Valley Designs

• Bayside Charm - Tread

About the full video

This project demonstrates the quick and easy installation of pre-made, self-adhesive stair treads to add style, safety, and comfort to wooden stairs. The process involves preparing the stairs, accurately positioning each tread, and securing them in place, transforming a bare staircase into a finished look.

Step 2 of 2: Position and Secure Your Tread

Carefully position your Oak Valley Designs carpet stair tread onto the pre-cleaned step or landing area. Take a moment to ensure it’s perfectly aligned with your intended placement. Once satisfied, apply firm, even pressure across the entire surface of the tread. This ensures the pressure-sensitive adhesive makes full, secure contact with your stair surface, creating a stable and safe foundation for every step. Remember, good contact means lasting security!

Open this step in the guide

Every video in how to install carpet stair treads

1. Step 1: Expose the Adhesive: Peel the Protective Liner

   • 0:16–0:21 Apply Peel-and-Stick Carpet Treads
   • 0:14–0:17 Peel Backing from Tread
   • 0:08–0:10 Prepare the Self-Adhesive Stair Tread

2. Step 2: Position and Secure Your Tread

   • 0:17–0:21 Position and Adhere Treads
   • 0:10–0:13 Secure the First Tread (this video)
   • 0:10–0:18 Place and Secure First Tread