Position and Adhere Treads

What happens in this clip

Once the adhesive is exposed, the carpet stair tread is carefully positioned onto a stair. A tape measure is then used to quickly double-check the placement, likely for centering or consistent spacing from the edge. After confirming the position, the tread is pressed down firmly with hands to ensure secure adhesion and smoothed out to remove any air bubbles or wrinkles. This process is repeated for all stairs.

Goal: Securely attach stair treads to each step.

What's used

Tools

• Tape Measure
• Yardstick

Materials

• Oak Valley Designs Carpet Stair Tread Oak Valley Designs

Pro tips for this step

• Oak Valley Designs Pro Tip: Press firmly and evenly across the whole tread to make sure the adhesive sticks securely for lasting safety.

These safety tips are AI-generated and have not been verified by a professional. They may be incomplete or incorrect. Verify independently against manufacturer instructions and local codes, and consult a qualified professional before relying on them. This is not a substitute for professional advice.

Shop this step at Oak Valley Designs

• Bayside Charm - Tread

About the full video

This project demonstrates how to quickly and easily install self-adhesive carpet stair treads on outdoor stairs. The primary motivation is to provide a safer, less slippery surface for an aging dog, but it also enhances the aesthetic appeal of the stairs. The process involves simply peeling the backing and pressing the treads into place, requiring no power tools and minimal time.

Step 2 of 2: Position and Secure Your Tread

Carefully position your Oak Valley Designs carpet stair tread onto the pre-cleaned step or landing area. Take a moment to ensure it’s perfectly aligned with your intended placement. Once satisfied, apply firm, even pressure across the entire surface of the tread. This ensures the pressure-sensitive adhesive makes full, secure contact with your stair surface, creating a stable and safe foundation for every step. Remember, good contact means lasting security!

Open this step in the guide

Every video in how to install carpet stair treads

1. Step 1: Expose the Adhesive: Peel the Protective Liner

   • 0:16–0:21 Apply Peel-and-Stick Carpet Treads
   • 0:14–0:17 Peel Backing from Tread
   • 0:08–0:10 Prepare the Self-Adhesive Stair Tread

2. Step 2: Position and Secure Your Tread

   • 0:17–0:21 Position and Adhere Treads (this video)
   • 0:10–0:13 Secure the First Tread
   • 0:10–0:18 Place and Secure First Tread