Measure Stair Tread Width
From how to measure stairs for carpet stair treads · Step 3 of 5 · Video by Oak Valley Designs
Showing 0:21–0:53 of the source video.
What happens in this clip
Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that's a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.
Goal: Measure the total width of your stair tread and then calculate the desired carpet tread width by subtracting the amount of exposed wood you want on each side.
What's used
Tools
- Tape Measure
About the full video
This video provides detailed instructions on how to accurately measure stair treads for custom carpet installations. It covers measuring both the width and depth of each tread, offering guidance on how to adjust these measurements to achieve the desired aesthetic of exposed wood. A helpful tip for visualizing the final fit using painter's tape is also included to ensure satisfaction before ordering.
What's said in this clip
You're going to take a measurement from the spindle to the wall. It could be wall to wall, whatever your staircase looks like. and that is 43 in. Next, you're going to want to decide how much wood to see on either side of the carpet stair tread. So, we recommend 2 to 4 in of wood on either side. Let's go with 4 in for this order. And let's say 4 in + 4 in is 8. 43 - 8 is 35. So, a 35 wide stair tread is perfect for this step. Let's go to measurement number two.
Automatically transcribed from the source video.
Step 3 of 5: Getting the Width Right: From Wall to Wall or Edge to Edge
Next up, we'll tackle the width of each tread. Run your tape measure across the very front edge of the tread, making sure it's perfectly parallel to the back edge where the tread meets the riser. If your staircase is embraced by walls on both sides, measure from wall to wall. If you have an open staircase on one side, measure from the exposed edge of the tread to the opposite side. Remember, for a clean, design-conscious look, standard residential treads typically allow for about a 1-inch space on each side. This means a 36-inch wide stair generally accommodates a 34-inch tread, giving your installation that polished, custom-made to fit appearance.
Other videos for this step
how to measure stairs for carpet stair treads
Ready to elevate your staircase with beautiful, safe, and custom-fit carpet treads? This DIY-friendly guide walks you through the essential steps to accurately measure each individual step of your straight staircase. Precision is key! We'll cover how to get exact width and depth measurements, especially crucial for those charming older homes where steps can vary. Follow our expert advice to record and label your measurements for a truly custom fit, ensuring your new Oak Valley Designs treads bring both safety and style to your home.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.