Inspect Damaged Carpet Edge

What happens in this clip

The video begins by highlighting a significant issue: a loose and frayed carpet edge on a stair tread, specifically at the nosing. This creates a potential tripping hazard. The person in the video demonstrates the problem by easily lifting the edge of the carpet, revealing the underlying carpet backing and the stair surface from which it has become detached. This initial assessment helps in understanding where the adhesive needs to be applied and how much carpet needs re-securing.

Goal: Assess the extent of the damage by visually inspecting the loose and frayed carpet edge on the stair nosing, lifting it to reveal the detached backing.

About the full video

This video demonstrates how to repair a loose and frayed carpet edge on a stair nosing. The process involves applying adhesive to re-bond the carpet, pressing it firmly into place, and trimming any excess frayed fibers to restore safety and appearance.

Step 2 of 7: Examine Carpet Tread Adhesion

Using a putty knife or your fingers, gently lift the edge of the carpet tread, particularly at the nosing where it meets the edge of the stair. Inspect the underside of the carpet and the surface of the stair tread for signs of dried-out adhesive, insufficient glue, or complete separation. Look for any debris or residue that might be preventing proper adhesion.

Open this step in the guide

Every video in How to Fix Popping Noises from Adhesive Carpet Treads on Wood Stairs

1. Step 1: Inspect Carpet Tread Noise

   • 0:00–0:17 Identify Squeak Location
   • 2:21–3:48 Diagnose Creaking Causes

2. Step 2: Examine Carpet Tread Adhesion

   • 0:00–0:04 Inspect Damaged Carpet Edge (this video)
   • 0:06–0:17 Inspect Loose Stair Nosing
   • 0:36–0:40 Apply Adhesive to Secure Carpet

3. Step 3: Clean Carpet Tread Underside and Stair Surface

   • 0:09–0:45 Prepare and Clean Stair Treads
   • 0:07–0:17 Apply Adhesive to Carpet and Subfloor
   • 0:00–0:05 Prepare the Loose Carpet Section

4. Step 4: Apply New Adhesive

   • 0:07–0:17 Apply Adhesive to Carpet and Subfloor
   • 0:04–0:08 Apply Spray Adhesive
   • 0:04–0:08 Apply Carpet Adhesive

5. Step 5: Reinforce Loose Carpet Edges (Optional)

   • 0:29–0:34 Secure Carpet Edge with Staples
   • 0:08–0:11 Secure Carpet at Bullnose with Stapler
   • 0:11–0:14 Secure Carpet with Staples

6. Step 6: Address Sub-Surface Creaks

   • 3:29–3:39 Eliminate Squeaks from Treads
   • 0:14–0:34 Fix Squeaks from Underneath with Shims
   • 1:24–2:44 Fix Squeaks on Carpeted Stairs

7. Step 7: Test Repaired Treads

   • 11:15–11:37 Final Inspection
   • 0:07–0:10 Test Stair Stability
   • 4:28–5:00 Test the Repaired Stairs