
Clip 1/3
Helpful?
Step 1 · Clean the Chipped Area
Using a stiff brush or wire brush, vigorously scrub the chipped area to dislodge any loose concrete particles, dirt, or old paint. For finer dust, a shop vacuum or compressed air can be used to ensure the surface is completely clean. The area should be dry before proceeding to the next step.
Tools and Materials
Scrub Brush
Lincoln Electric 14 in. Long Wooden Handled Carbon Steel Welding Wire Brush (.7 in. x 6.4 in. Bristle Area 3 x 19 Row)
Shop Vacuum
XtremepowerUS 30 Gal. 125 PSI Maximum Pressure Heavy-Duty 13HP Gas Engine Piston Air Compressor

