Clip 1/3
Helpful?
Step 3 · Install New Treads and Risers
Position the new risers first, securing them to the stringers and sub-tread or nosing of the tread below. Then, install the new treads. Ensure the front edge of the tread (the nosing) extends slightly past the riser. Treads are typically secured through the stringers from underneath with screws or nails, and also by adhering them to the sub-tread and riser. Use construction adhesive for extra strength. Make sure each tread is level and firmly attached. If using pre-finished treads, be careful not to scratch them during installation.
Tools and Materials
Miter Saw
Measuring Tape
Pencil
18-Gauge Cordless AirStrike Brad Nailer
Titebond 28 oz. Solvent-Based Heavy Duty Construction Adhesive (12-Pack) 5262
Wood Screws
DEWALT 2-1/2 in. x 16-Gauge Plastic Collated Straight Finish Nails (2500 per Box)
Stairtek 0.75 in. x 7.5 in. x 42 in. Prefinished Marsh Red Oak Riser
Sandpaper
Subscribe for exclusive updates
Be the first to know about promotions, new products, and sales.