DIY HUB Saved
powered by
Clip 1/3
Helpful?

Step 2 · Measure the Tread Depth

For each step, place your tape measure firmly against the vertical riser. Extend it straight across the flat part of the tread and over the rounded front edge, which we call the 'nosing'. It's crucial that the tape lies perfectly flat and level. Safety-conscious tip: Never measure over old carpet, staples, or glue residue. Measuring the bare wood is the only way to get an accurate depth for a tread that will fit securely and look seamless. Carefully record the depth for every single step.

Oak Valley Info Pro Tip

Don't measure over existing carpet, vinyl, or adhesive; it throws off your depth.

Safety Warnings (1)

General Hazard

Do not measure over old flooring, carpet, or adhesive, as it throws off the depth.

ⓘ These safety tips are AI-generated and have not been verified by a professional. They may be incomplete or incorrect. Verify independently against manufacturer instructions and local codes, and consult a qualified professional before relying on them. This is not a substitute for professional advice.

powered by
Measure the Tread Depth · how to measure stairs · Oak Valley Designs DIY Hub

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.