← Guide
how to measure stairs for custom stair treads, including diagonal steps and varying widths
Step 4 of 4
Step 4 · Step 4: Record, Label, and Double-Check
With all your measurements taken, it's time to organize them. Write down the width and depth for every individual step in your notebook. Don't assume they are all the same—variations are very common, especially in older homes, and this is where The Oak Valley Difference truly shines! If you have any steps with unique dimensions, place a piece of masking tape on the riser and number it to match your notes. For the ultimate peace of mind when ordering your custom-made treads, we highly recommend taking a clear photo of each measurement on the step itself. And finally, live by the carpenter's motto: 'Measure twice, cut once.' In our case, it's 'measure twice, order once' for a perfect, stress-free installation.
Measure twice, write it down once — small errors cause costly delays during install.
Mark each step with masking tape and a number if they differ — no two stairs are exactly alike, especially in older homes.
Measure twice and write it down once to ensure accuracy and avoid costly mistakes when ordering custom treads.
Measure twice and write it down once to ensure accuracy and avoid costly mistakes when ordering custom treads.
Numbering steps that vary will help you keep track of which measurement belongs to which tread.
Numbering steps that vary will help you keep track of which measurement belongs to which tread.
General Hazard
Do not assume all treads are the same size; measure each one individually, as even a quarter-inch difference can affect comfort, safety, and fit.
You've reached the last step
Nice work — share this guide or find your next project.
Subscribe for exclusive updates
Be the first to know about promotions, new products, and sales.